AZ7555

AZ7555 20 AMP MINIATURE POWER RELAY FEATURES Dielectric strength 5000 Vrms Low cost Epoxy sealed version available 20 Amp switching — single pole contacts 5.0 mm terminal spacing Class F insulation system available UL, CUR file E44211 TUV R50290835 CONTACTS Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Rated Load UL, CUR Resistive load: Max. switched power: 480 W or 5kVA Max. switched current: 20 A Max. switched voltage: 30* VDC or 277 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Normally Open Contacts (N.O.) Std & Sen. Coil 20 A at 125 VAC, Resistive, 100k cycles, 85°C 20 A at 250 VAC, General Use, 6k cycles, 40°C 16 A at 250 VAC, Resistive, 100k cycles, 85°C 16 A at 30 VDC, Resistive, 100k cycles, 85°C 1/6 HP at 250 VAC, 100k cycles, 85°C Normally Closed Contacts (N.C.) Std & Sen. Coil 10 A at 125 VAC, Resistive, 100k cycles, 85°C 8 A at 250 VAC, Resistive, 100k cycles, 85°C 8 A at 30 VDC, Resistive, 100k cycles, 85°C Super Sensitive Coil Only 15A@150VAC inductive (General Use 85°C 0.75-0.8pf) NO 15A@277VAC/30VDC resistive 85°C NO and NC 480VA@240/277VAC pilot duty NO and NC 480VA@277VAC standard (magnetic) ballast NO and NC 600W@120VAC Tungsten NO 240W@120VAC Tungsten NC 1/3hp@120/240VAC NO 1/6hp@120/240VAC NC 1/4hp@277VAC NO 1/8hp@277VAC NC TUV Material Resistance 5A NO / 3A NC @ 250VAC / 30VDC, 100k cycles, 85°C 10A NO / 5A NC @ 250VAC / 30VDC, 100k c...