TXU-105S
Through Hole TCXO
Parameter
Standard range Standard frequencies Frequency stability:
vs. Temperature vs. Supply & Load change vs. Aging Frequency tolerance ex. factory Supply voltage Other values optional on request 9 ~ 12 V Supply current Output signal Output level Output load Frequency adjustment
Operating temperature range
Storage temperature range Customers specs on request
Output signal Sine wave Wide frequency range up to 40 Hz Low Phase Noise Tight frequency stability
Specification
TXU-105S3
TXU-105S5
1.0 ~ 40 MHz
6.40, 10.00, 12.80, 15.36, 16.384 & 20.00 MHz
≤ ± 0.5 ~ ± 2.5 ppm
≤ ± 0.2 ppm ≤ ± 1.0 ppm
±5% 1st year
≤ ± 1.0 ppm @ +25 °C
+3.3 V ± 5 %
+5.0 V ± 5 %
5 ~ 20 mA
Sine wave
0 dBm
10 dBm
50 Ω
± 5 ppm With internal trimmer
Optional with external potentiometer
-20 ~ +75 °C
Standard application
-40 ~ +85 °C
Industrial application
-55 ~ +125 °C
Pin function
# 1 GND or external potentiometer # 2 GND or N.C. # 3 Vdc Supply voltage # 4 RF Output # 5 GND case
Other Pin function on request
Phase Noise (@ 15.36 MHz carrier)
-100 dBc/Hz -130 dBc/Hz -145 dBc/Hz -148 dBc/Hz -152 dBc/Hz
@ 10 Hz @ 100 Hz @ 1 kHz @ 10 kHz @ 100 kHz
Environmental & Mechanical specification
Shock Vibration Solderability Seal integrity
MIL-STD-883C, Method 2002, Con B MIL-STD-883C, Method 2007, Con A MIL-STD-883C, Method 2003 MIL-STD-883C, Method 2014, Con C&A2
QuartzCom AG
[email protected]
www.quartzcom.com
2002/95/EC RoHS compliant
QuartzCom Asia
[email protected]
QuartzCom Pacific
[email protected]
29 sept. 09
.