Hi-Speed USB 2.0 to 10/100/1000 Ethernet Controller
LAN7500/LAN7500i
Hi-Speed USB 2.0 to 10/100/1000 Ethernet Controller
PRODUCT FEATURES
Highlights
Single Chip Hi-Spee...
Description
LAN7500/LAN7500i
Hi-Speed USB 2.0 to 10/100/1000 Ethernet Controller
PRODUCT FEATURES
Highlights
Single Chip Hi-Speed USB 2.0 to 10/100/1000 Ethernet Controller
10/100/1000 Ethernet MAC with Full-Duplex Support 10/100/1000 Ethernet PHY with HP Auto-MDIX Integrated USB 2.0 Hi-Speed Device Controller Integrated USB 2.0 Hi-Speed PHY Implements Reduced Power Operating Modes Supports EEPROM-less Operation for Reduced BOM NetDetach provides automatic USB attach/detach
when Ethernet cable is connected/removed
Target Applications
Embedded Systems / CE Devices Set-Top Boxes / PVR’s Networked Printers USB Port Replicators Standalone USB to Ethernet Dongles Test Instrumentation / Industrial
Key Benefits
USB Device Controller — Fully compliant with USB Specification Revision 2.0 — Supports HS (480 Mbps) and FS (12 Mbps) modes — Four endpoints supported — Supports vendor specific commands — Integrated USB 2.0 PHY — Remote wakeup supported
High-Performance 10/100/1000 Ethernet Controller — Fully compliant with IEEE802.3/802.3u/802.3ab — Integrated Ethernet MAC and PHY — 10BASE-T, 100BASE-TX, and 1000BASE-T support — Full- and half-duplex capability (only full-duplex operation at 1000Mbps) — Full-duplex flow control — Preamble generation and removal — Automatic 32-bit CRC generation and checking — 9 KB jumbo frame support — Automatic payload padding and pad removal — Loop-back modes — Supports checksum offloads (IPv4, IPv6, TCP, UDP) — Supports Microsoft ND...
Similar Datasheet