DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH
UNISONIC TECHNOLOGIES CO., LTD US2075C
DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH FOR USB
CMOS IC
DESCRIPTION
Th...
Description
UNISONIC TECHNOLOGIES CO., LTD US2075C
DUAL-CHANNEL POWER DISTRIBUTION CONTROL SWITCH FOR USB
CMOS IC
DESCRIPTION
The UTC US2075C is a dual channel power switch with independent enable and flag functions, optimized for bus-powered Universal Serial Bus (USB) and self-powered applications.
This product satisfies USB voltage drop requirement with soft start, which eliminates the momentary voltage drop on the upstream port that may occur.
In addition, the UTC US2075C is equipped with over-temperature and over-current detectors, each flag output is available to indicate fault conditions independently to the USB controller. The UTC US2075C is available in active-high versions.
FEATURES
* 100 μA MAX operating current * 5μA MAX standby current * 3.5V ~ 5.5V operating range * Two P-channel power MOSFET control switch * Over-current protection * Under-voltage lockout circuit * Thermal shutdown circuit * Soft-start circuit * Flag indicates fault conditions
ORDERING INFORMATION
Ordering Number US2075CG-S08-R
Package SOP-8
Packing Tape Reel
MARKING
www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd
1 of 10
QW-R502-255.C
US2075C
PIN CONFIGURATION
CMOS IC
CTL1 1 FLAG1 2 FLAG2 3
CTL2 4
8 OUT1
UTC US2075C
7 IN 6 GND 5 OUT2
PIN DESCRIPTION
PIN NO 1
2
3
4 5 6 7 8
PIN NAME CTL1
FLAG1
FLAG2
CTL2 OUT2 GND
IN OUT1
DESCRIPTION Switch1Control Input: Logic-compatible, active-high. TTL input Fault Detection Flag 1 (OUTPUT): Active-low. N-ch open-drain. Indi...
Similar Datasheet