SA606

SA606 Low-voltage high performance mixer FM IF system Rev. 6 — 8 November 2013 Product data sheet 1. General description The SA606 is a low-voltage high performance monolithic FM IF system incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic Received Signal Strength Indicator (RSSI), voltage regulator and audio and RSSI op amps. The SA606 is available in SO20 and SSOP20 packages. The SA606 was designed for portable communication applications and will function down to 2.7 V. The RF section is similar to the famous SA605. The audio and RSSI outputs have amplifiers with access to the feedback path. This enables the designer to adjust the output levels or add filtering. 2. Features and benefits  Low power consumption: 3.5 mA typical at 3 V  Mixer input to >150 MHz  Mixer conversion power gain of 17 dB at 45 MHz  XTAL oscillator effective to 150 MHz (LC oscillator or external oscillator can be used at higher frequencies)  102 dB of IF amp/limiter gain  2 MHz IF amp/limiter small signal bandwidth  Temperature compensated logarithmic RSSI with a 90 dB dynamic range  Low external component count; suitable for crystal/ceramic/LC filters  Excellent sensitivity: 0.31 V into 50  matching network for 12 dB SINAD (Signal-to-Noise-and-Distortion ratio) for 1 kHz tone with RF at 45 MHz and IF at 455 kHz  SA606 meets cellular radio specifications  Audio output internal op amp  RSSI output internal op amp  Interna...