POWER MANAGEMENT CONTROLLER
Si3483
POWER MANAGEMENT CONTROLLER
Features
Enables use of smaller power
Supports classification-based and
supp...
Description
Si3483
POWER MANAGEMENT CONTROLLER
Features
Enables use of smaller power
Supports classification-based and
supplies for up to 64-port PoE
LLDP power negotiation
systems with Si3459 and Si3454 Supports individual port priority and
PSE interface ICs
port configuration
Can operate with or without a host Supports Power supply status from
Configuration save capability
up to 3 power supplies
Pin-selectable SPI or UART interface 24-pin Quad flat pack package
Pin-selectable UART data rate
4x4 mm PCB footprint; RoHS
Fully-compliant with IEEE 802.3-AT
complaint
Types I and II
Extended temperature operating
range (–40 to +85 °C)
Applications
Power over Ethernet Endpoint
Industrial automation systems
switches and Midspans
Networked audio
Supports high-power PDs, such as: IP Phone Systems and iPBXs
Pan/Tilt/Zoom security cameras
Wireless Access Points
Security and RFID systems
Description
The Si3483 is a power manager intended for use with the Si3459 Power over Ethernet (PoE) controllers for power management of up to 64 ports with three power sources.
The Si3459 is capable of delivering over 30 W per port, which means that, in a 24or 48-port system, a very large power supply would have to be used to avoid overload. Typically, not all ports are used at full power; so, a smaller power supply can be used along with the Si3483 power management controller.
Use of the Si3483 power manager greatly simplifies system implementati...
Similar Datasheet