MT9J003

DATA SHEET www.onsemi.com 1/2.3-Inch 10 Mp CMOS Digital Image Sensor MT9J003 General Description The onsemi MT9J003 is a 1/2.3−inch CMOS active−pixel digital imaging sensor with an active pixel array of 3856 (H) x 2764 (V) including border pixels. It can support 10 Mp (3664 (H) x 2748 (V)) digital still images and a 1080 p (3840 (H) x 2160 (V)) digital video mode. It incorporates sophisticated on−chip camera functions such as windowing, mirroring, column and row skip modes, and snapshot mode. It is programmable through a simple two−wire serial interface and has very low power consumption. The MT9J003 digital image sensor features onsemi’s breakthrough low−noise CMOS imaging technology that achieves near−CCD image quality (based on signal−to−noise ratio and low−light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. When operated in its default 4:3 still−mode, the sensor generates a full resolution image at 15 frames per second (fps) using the HiSPi serial interface. An on−chip analog−to−digital converter (ADC) generates a 12−bit value for each pixel. Features  1080p Digital Video Mode  Simple Two−wire Serial Interface  Auto Black Level Calibration  Support for External Mechanical Shutter  Support for External LED or Xenon Flash  High Frame Rate Preview Mode with Arbitrary Down−size Scaling from Maximum Resolution  Programmable Controls: Gain, Horizontal and Vertical Blanking, Auto Black Level Offset Correction, Frame Size/rate...