SPI Serial EEPROM
FMD Confidential
Fremont Micro Devices
FT25C08A DS
SPI Serial EEPROM 8K (8-bit wide)
FEATURES
Serial Peripheral In...
Description
FMD Confidential
Fremont Micro Devices
FT25C08A DS
SPI Serial EEPROM 8K (8-bit wide)
FEATURES
Serial Peripheral Interface (SPI) Compatible Supports SPI Modes 0 (0,0) and 3 (1,1)
Data Sheet Describes Mode 0 Operation Low voltage and low power operations
FT25C08A VCC = 1.8V to 5.5V 20MHz clock rate (5V) Maximum Standby current < 1µA (typically 0.02µA and 0.06µA @ 1.8V and 5.5V respectively) Partial page write operation allowed (32 bytes page write mode) Self-timed programming cycle (5 ms max) Block Write Protection (Protect 1/4, 1/2, or Entire Array) Write protect pin for hardware data protection High reliability: typically 1,000,000 cycles endurance 100 years data retention Industrial temperature range (-40℃to 85℃) Standard 8-pin DIP/SOP/TSSOP Pb-free packages
DESCRIPTION
The FT25C08A is 8192 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 1024 words of 8 bits (1 byte) each. The devices are fabricated with proprietary advanced CMOS process for low power and low voltage applications. These devices are available in standard 8-lead DIP, 8-lead SOP and 8-lead TSSOP packages. The memory is accessed via a simple Serial Peripheral Interface (SPI) compatible serial bus. The HOLD pin may be used to suspend any serial communication without resetting the serial sequence. While the device is paused, transitions on its inputs will be ignored. Our extended VCC range (1.8V to 5.5V) device...
Similar Datasheet