ACMD-6103

ACMD-6103 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-6103 is a highly miniaturized duplexer designed for use in LTE Band 3 (1710 – 1785 MHz UL, 1805 – 1880 MHz DL) handsets and mobile data terminals. Low Insertion Loss in the Tx channel minimizes current drain from the power amplifier, while low Rx channel Insertion Loss improves receiver sensitivity. The ACMD-6103 enhances the sensitivity and dynamic range of handset receivers by providing high isolation of the transmitted signal from the receiver input and high rejection of transmit-generated noise in the receive band. The ACMD-6103 is designed with Avago’s innovative Film Bulk Acoustic Resonator (FBAR) technology, which makes possible ultra-small, high-Q filters at a fraction of their usual size. The excellent power handling capability of FBAR bulk-mode resonators supports the high output power levels used in mobile communications applications, while adding virtually no distortion. The ACMD-6103 also utilizes Avago’s advanced Microcap bonded-wafer, chip scale packaging technology. This process allows the filters to be assembled into a molded chipon-board module with an overall size of only 1.6 x 2.0 mm and height of 0.9 mm. The ACMD-6103 is compatible with standard 1.6 x 2.0 mm duplexer PCB footprints. Functional Block Diagram Ant Port 3 (Pin 6) Features Miniature Size - 1.6 × 2.0 mm size - 0.9 mm height - Standard 1.6 × 2.0 mm PCB footprint High Isolation High Power Rating - +33 dBm ...