Low-Power Mobile VGA EMI Reduction IC
P1817A, P1817B
Product Preview Low-Power Mobile VGA EMI Reduction IC
Description
The P1817 is a versatile spread spect...
Description
P1817A, P1817B
Product Preview Low-Power Mobile VGA EMI Reduction IC
Description
The P1817 is a versatile spread spectrum frequency modulator designed specifically for input clock frequencies. The P1817 reduces electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of down stream clock and data dependent signals. The P1817 allows significant system cost savings by reducing the number of circuit board layers, ferrite beads, shielding and other passive components that are traditionally required to pass EMI regulations.
The P1817 modulates the output of a single PLL in order to “spread” the bandwidth of a synthesized clock, and more importantly, decreases the peak amplitudes of its harmonics. This results in significantly lower system EMI compared to the typical narrow band signal produced by oscillators and most frequency generators. Lowering EMI by increasing a signal’s bandwidth is called ‘spread spectrum clock generation.’
The P1817 uses the most efficient and optimized modulation profile approved by the FCC and is implemented in a proprietary all digital method.
http://onsemi.com
SOIC−8 S SUFFIX CASE 751BD
TSSOP−8 T SUFFIX CASE 948AL
PIN CONFIGURATION
1 CLKIN / XIN
XOUT
VSS
VDD
SR0 REF
SSON / SBM
ModOUT
Applications The P1817 is targeted towards notebook LCD displays, and other
displays using an LVDS interface, PC peripheral devices, and embedded systems.
Features
FCC Approved Method of EMI Attenuation Generates a Low...
Similar Datasheet