Document
SMD LED Product Data Sheet
LTSA-C170TGKT
Spec No.: DS22-2014-0451 Effective Date: 10/24/2015 Revision: B
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
LITE-ON Technology Corp. / Optoelectronics
No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto
SMD LED LTSA-C170TGKT
1. Description
SMD LED lamps from Lite-On are available in miniature sizes and special configurations for automated PC board assembly and space-sensitive applications. These SMD LED lamps are suitable for use in a wide variety of electronic equipment, eg: cordless and cellular phones, notebook computers and network systems…
1.1 Features
Meet RoHS and HF Ultra Bright InGaN Green Chip LED 0805 Package in 8mm tape on 7" diameter reels. EIA STD package I.C. compatible Compatible with automatic placement equipment Compatible with infrared reflow solder process
1.2 Applications
Automotive: accessary application
2. Package Dimensions
Part No. LTSA-C170TGKT
Lens Color Water Clear
Notes: 1. 2.
All dimensions are in millimeters (inches). Tolerance is ±0.1 mm (.004") unless otherwise noted.
Source Color InGaN Green
1/11
Part No. : LTSA-C170TGKT BNS-OD-FC002/A4
3. Rating and Characteristics
3.1 Absolute Maximum Ratings at Ta=25°C
Parameter
Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) DC Forward Current Operating Temperature Range Storage Temperature Range Infrared Soldering Condition
Symbol Pd IFP IF Topr Tstg Tsol
SMD LED LTSA-C170TGKT
LTSA-C170TGKT
Unit
76 mW
100 mA
20 -20°C to + 80°C -30°C to + 100°C
mA
260 °C For 10 Seconds
3.2 Suggest IR Reflow Condition For Pb Free Process (Acc. to IPC J-STD-020):
2/11
Part No. : LTSA-C170TGKT BNS-OD-FC002/A4
3.3 Electrical / Optical Characteristics at Ta=25°C
SMD LED LTSA-C170TGKT
Parameter Luminous Intensity Viewing Angle
Symbol IV
LTSA-C170TGKT
MIN.
TYP.
MAX.
71.0
- 450.0
Unit mcd
21/2
-
130
- deg
Test Condition
IF = 20mA Note 1
Note 2
Peak Emission Wavelength
λp
-
530
Measurement - nm
@Peak (Fig.1)
Dominant Wavelength
λd 520.0
-
535.0
nm
IF=20mA Note 3
Spectral Line Half-Width
Δλ
-
35
- nm
-
Forward Voltage
VF 2.80
-
3.60 V
IF = 20mA Note 4
Reverse Current
IR -
-
10 μA
VR = 5V
Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE
eye-response curve. 2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single
wavelength which defines the color of the device. 4. Caution in ESD:
Static Electricity and surge damages the LED. It is recommend to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded 5. Reverse voltage (VR) condition is applied to IR test only. The device is not designed for reverse operation
3/11
Part No. : LTSA-C170TGKT BNS-OD-FC002/A4
SMD LED LTSA-C170TGKT
4. Bin Rank
4.1 Bin code list
Vf Rank
Forward Voltage Bin Code
G H J K
Color : Green , Unit : V @20mA
Min.
Max.
2.80
3.00
3.00
3.20
3.20
3.40
3.40
3.60
Tolerance on each Forward Voltage bin is +/-0.1 volt
IV Rank
Luminous Intensity
Color : Green , Unit : mcd @20mA
Bin Code K L M N
Min. 71.0 112.0 180.0 280.0
Max. 112.0 180.0 280.0 450.0
Tolerance on each Luminous Intensity bin is +/- 11%
Hue Rank
Dominant Wavelength
Color : Green , Unit : nm @20mA
Bin Code F G H
Min. 520.0 525.0 530.0
Max. 525.0 530.0 535.0
Tolerance for each Dominate Wavelength bin is +/- 1nm
4/11
Part No. : LTSA-C170TGKT BNS-OD-FC002/A4
SMD LED LTSA-C170TGKT
5. Typical Electrical / Optical Characteristics Curves.
(25°C Ambient Temperature Unless Otherwise Noted)
5/11
Part No. : LTSA-C170TGKT BNS-OD-FC002/A4
SMD LED LTSA-C170TGKT
6. User Guide
6.1 Cleaning
Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute.
6.2 Recommend Printed Circuit Board Attachment Pad
6.3 Package Dimensions Of Tape And Reel
Note: 1. All dimensions are in millimeters (inches).
6/11
Part No. : LTSA-C170TGKT BNS-OD-FC002/A4
6.4 Package Dimensions of Reel
SMD LED LTSA-C170TGKT
Notes: i. Empty component pockets sealed with top cover tape. ii. 7 inch reel-3000 pieces per reel. iii. Minimum packing quantity is 500 pieces for remainders. iv. The maximum number of consecutive missing lamps is two. v. In accordance with ANSI/EIA 481 specifications.
7/11
Part No. : LTSA-C170TGKT BNS-OD-FC002/A4
SMD LED LTSA-C170TGKT
7. Cautions
7.1 Application
The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).Consult Liteon’s Sales in advance for i.