GPS LOW NOISE AMPLIFIER
RF2815GPS Low Noise Amplifier with Integrated Output SAW Filter
RF2815
GPS LOW NOISE AMPLIFIER WITH INTEGRATED OUTPUT ...
Description
RF2815GPS Low Noise Amplifier with Integrated Output SAW Filter
RF2815
GPS LOW NOISE AMPLIFIER WITH INTEGRATED OUTPUT SAW FILTER
Package: Module, 3.3x2.1x1.0
Features
Low Noise Figure: 0.85dB (Typ.)
High Gain: 13.5dB High IIP3: +9dBm Operable Over Wide Supply
Voltage Range: 1V to 3.6V CMOS Compatible Shutdown
Function (<0.1uA) Current Tunability Via Single
Resistor No External DC-Blocking
Capacitor Required at the Output - Lowest BOM Cost and Small Solution Size Compact Footprint: 3.3 mm x 2.1 mm x 1.0 mm
Applications
Cellular and Non-Cellular GPS Receivers
INPUT
VDD
Input M atch
RF2815
OUTPUT
VSD
Functional Block Diagram
Product Description
The RF2815 is a GPS Low Noise Amplifier with an integrated SAW filter at the output. Low noise figure, along with high gain, achieved by the RF2815 makes it ideal for GPS recievers requiring high sensitivity. This module builds upon RFMD’s leading edge pHEMT process and integrates input matching and low loss high rejection SAW filter at the output. This results in high performance and a reduced solution size. The ease of implementation simplifies the reciever design. The RF2185 is packaged in a compact 3.3mmx2.1mmx1.0mm package with low external component count required to achieve the best-in-class performance.
Ordering Information
RF2815
GPS Low Noise Amplifier with Integrated Output SAW Filter
RF2815PCBA-410 Fully Assembled Evaluation Board
DS100211
Optimum Technology Matching® Applied
GaAs HBT
SiGe B...
Similar Datasheet