LP6212

Preliminary Datasheet LP6212 High Efficiency 6A Boost DC/DC Convertor General Description The LP6212 is a current mode boost DC-DC converter. Its PWM circuitry with built-in 6A Current power MOSFET makes this converter highly efficient. Selectable high switching frequency allows faster loop response and easy filtering with a low noise output. The non-inverting input its error amplifier is connected to an internal 0.6V precision reference voltage. Soft-Start time can be programmed with an external capacitor, which sets the input current ramp rate. Current mode control and external compensation network make it easy and flexible to stabilize the system. Ordering Information LP6212 □ □ □ Features  Up to 94% efficiency　  Output to Input Disconnect at Shutdown Mode  Shut-down current:<1uA 　  Output voltage Up to 5V/2.1A  Internal Compensation  1.2MHz fixed frequency switching  High switch on current:6A  Available in ESOP8 Package 　 Applications  Battery products  Host Products  Panel  Pin Configurations TOP VIEW F: Pb-Free Package Type SP: ESOP8 Typical Application Circuit Marking Information Device LP6212 Marking LPS LP6212 XXXX Package ESOP8 Shipping 3K/REEL LP6212 –00 Version1.0 Datasheet May.-2014 www.Lowpowersemi.com - - Page 1 of 6 Preliminary Datasheet Functional Pin Description PIN PIN Name Description 1 GND Ground Pin. 2 FB Feedback pin, the pin is 0.6V. 3 SW Switching Pin. 4 SW Switching Pin. 5 GND Ground Pin. 6 GND Ground Pin. 7 ...