DatasheetsPDF.com

MKL26Z32VFT4 Dataheets PDF



Part Number MKL26Z32VFT4
Manufacturers Freescale Semiconductor
Logo Freescale Semiconductor
Description Microcontroller
Datasheet MKL26Z32VFT4 DatasheetMKL26Z32VFT4 Datasheet (PDF)

Freescale Semiconductor, Inc. Data Sheet: Technical Data Document Number: KL26P64M48SF5 Rev 5 08/2014 Kinetis KL26 Sub-Family 48 MHz Cortex-M0+ Based Microcontroller MKL26ZxxxVFM4 MKL26ZxxxVFT4 MKL26ZxxxVLH4 Designed with efficiency in mind. Compatible with all other Kinetis L families as well as Kinetis K2x family. General purpose MCU with USB 2.0, featuring market leading ultra low-power to provide developers an appropriate entry-level 32-bit solution. 32-pin QFN (FM) 48-pin QFN (FT) .

  MKL26Z32VFT4   MKL26Z32VFT4



Document
Freescale Semiconductor, Inc. Data Sheet: Technical Data Document Number: KL26P64M48SF5 Rev 5 08/2014 Kinetis KL26 Sub-Family 48 MHz Cortex-M0+ Based Microcontroller MKL26ZxxxVFM4 MKL26ZxxxVFT4 MKL26ZxxxVLH4 Designed with efficiency in mind. Compatible with all other Kinetis L families as well as Kinetis K2x family. General purpose MCU with USB 2.0, featuring market leading ultra low-power to provide developers an appropriate entry-level 32-bit solution. 32-pin QFN (FM) 48-pin QFN (FT) This product offers: 5 x 5 x 1 Pitch 0.5 mm 7 x 7 x 1 Pitch 0.5 mm • Run power consumption down to 40 μA/MHz in very low power run mode • Static power consumption down to 2 μA with full state retention and 4.5 μs wakeup • Ultra-efficient Cortex-M0+ processor running up to 48 MHz with industry leading throughput 64-pin LQFP (LH) 10 x 10 x 1.4 Pitch 0.5 mm • Memory option is up to 128 KB flash and 16 KB RAM • Energy-saving architecture is optimized for low power with 90nm TFS technology, clock and power gating techniques, and zero wait state flash memory controller Performance Human-machine interface • 48 MHz ARM® Cortex®-M0+ core • Low-power hardware touch sensor interface (TSI) • Up to 50 general-purpose input/output (GPIO) Memories and memory interfaces • Up to 128 KB program flash memory Communication interfaces • Up to 16 KB SRAM • USB full-/low-speed On-the-Go controller with on- chip transceiver and 5 V to 3.3 V regulator System peripherals • Two 16-bit SPI modules • Nine low-power modes to provide power optimization • I2S (SAI) module based on application requirements • One low power UART module • COP Software watchdog • Two UART modules • 4-channel DMA controller, supporting up to 63 request • Two I2C module sources • Low-leakage wakeup unit Analog Modules • SWD debug interface and Micro Trace Buffer • Bit Manipulation Engine • 16-bit SAR ADC • 12-bit DAC Clocks • 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal oscillator • Analog comparator (CMP) containing a 6-bit DAC and programmable reference input • Multi-purpose clock source Timers Operating Characteristics • Six channel Timer/PWM (TPM) • Two 2-channel Timer/PWM modules • Voltage range: 1.71 to 3.6 V • Periodic interrupt timers • Flash write voltage range: 1.71 to 3.6 V • 16-bit low-power timer (LPTMR) • Temperature range (ambient): -40 to 105°C • Real time clock Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. © 2013–2014 Freescale Semiconductor, Inc. All rights reserved. Security and integrity modules • 80-bit unique identification number per chip Part Number MKL26Z32VFM4 MKL26Z64VFM4 MKL26Z128VFM4 MKL26Z32VFT4 MKL26Z64VFT4 MKL26Z128VFT4 MKL26Z32VLH4 MKL26Z64VLH4 MKL26Z128VLH4 Ordering Information Flash (KB) 32 64 128 32 64 128 32 64 128 Memory SRAM (KB) 4 8 16 4 8 16 4 8 16 Maximum number of I\O's 23 23 23 36 36 36 50 50 50 Related Resources Type Se.


MKL26Z128VFM4 MKL26Z32VFT4 MKL26Z64VFT4


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)