Relay
S110
1 Form A Solid State Relay
DESCRIPTION
The S110 is a bi-directional, single-pole, single-throw, normally open mult...
Description
S110
1 Form A Solid State Relay
DESCRIPTION
The S110 is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The circuit is composed of one LED on the input side which activates an optically coupled IC on the output - controlling the firing angle of two back-to-back SCRs. This circuit assures no false triggering under most adverse conditions, and a tight zero-volt window not exceeding 5V.
FEATURES Zero-Volt Cross Switching High transient immunity 400V blocking voltage 0.8A maximum continuous current High input-to-output isolation Solid state reliability
OPTIONS/SUFFIXES*
-H High Input / Output isolation -S Surface Mount Option -TR Tape and Reel Option
NOTE: Suffixes listed above are not included in marking on device for part number identification.
SCHEMATIC DIAGRAM
APPLICATIONS
Valve control Solenoids Home appliances Metering equipment Heating elements
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
UNIT MIN TYP MAX
Storage Temperature
°C -55
125
Operating Temperature
°C -40
85
Continuous Input Current mA
40
Transient Input Current
mA
400
Reverse Input Control Voltage
Output Power Dissipation
V mW
6
800
*The values indicated are absolute stress ratings. Functional operation of the device is not implied at these or any conditions in excess of those defined in electrical characteristics section of this document. Exposure to Absolute Ratings may cause permanent damage to the device and may adversely affect reliabili...
Similar Datasheet