AIC2822
2A 23V Synchronous PWM Step-Down Converter
FEATURES
2A Continuous Output Current
Wide 4.75V to 23V Operat...
AIC2822
2A 23V Synchronous PWM Step-Down Converter
FEATURES
2A Continuous Output Current
Wide 4.75V to 23V Operating Input Range Ouput Adjustable from 0.925V to12V Up to 95% Efficiency Low Rds(on) Internal Switches: 140mΩ and
120mΩ <3µA Supply Current in Shutdown Mode 550KHz Frequency Programmable Soft Start Thermal Shutdown Cycle by Cycle Over Current Protection Under Voltage Lockout Short Circuit Protection Over Voltage Protection
APPLICATIONS
Networking Systems Distributed Power Systems Pre-
Regulator for Linear
Regulators Set-top Box
DESCRIPTION
The AIC2822 is a monolithic synchronous stepdown converter. The device can provide 2A output current from a 4.75V to 23V input supply. The AIC2822’s current mode architecture and external compensation allow the transient response to be optimized over a wide range of loads and capacitors. Current mode control also provides cycle-bycycle current limit. The AIC2822 provides over voltage protection and thermal shutdown. An adjustable soft-start prevents inrush current during turn on. This device is available in a SOP-8 package, provides a very compact system solution with minimal external components and PCB area.
TYPICAL APPLICATIONS CIRCUIT
AIC2822 Typical Application Circuit
Analog Integrations Corporation
Si-Soft Research Center TEL: 886-3-5772500
FAX: 886-3-5772510
DS-2822G-03 20120807
www.analog.com.tw
1
PIN CONFIGURATION
AIC2822-XXXX XX
PACKING TYPE TR: TAPE & REEL TB: TUBE
P...