LED Driver IC
Ordering number : ENA2201A
LV5011MD
Bi-CMOS LSI
LED Driver IC
http://onsemi.com
Overview
LV5011MD is a High Voltage L...
Description
Ordering number : ENA2201A
LV5011MD
Bi-CMOS LSI
LED Driver IC
http://onsemi.com
Overview
LV5011MD is a High Voltage LED driver with internal power FET. LV5011MD is realized very simple LED circuits with a few external parts. It corresponds to various wide dimming controls including the TRIAC dimming control.
Note) This LV5011MD is designed or developed for general use or consumer appliance. Therefore, it is NOT permitted to use for automotive, communication, office equipment, and industrial equipment.
Function
High Voltage LED Driver Built-in output power FET Built-in TRIAC stabilized function Various Dimming Control
- TRIAC & Analog Input Selectable reference Voltage
- Internal 0.605V & External Input Voltage Over Voltage Protection Short Protection Circuit
SOIC-10 NB
Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum Input voltage REF_IN, CS, ACS pin Drain pin OUT2 pin Allowable power dissipation Junction temperature Operating Junction temperature Storage temperature
Symbol VIN max (Note1)
VDrain _abs VOUT2_abs Pd max Tj Topj (Note2) Tstg
Conditions With specified board *1
Ratings 0.3 to 42 0.3 to 7
0.3 to 600 0.3 to 42 0.6 150
30 to +125 40 to +150
unit V V V V W C C C
*1: Specified board=35mm×16.5mm×1.2mm, glass epoxy board Note1) Absolute maximum ratings represent the values which cannot be exceeded for any length of time. Note2) Even when the device is used within the range of absolute maximum ratings, as a result of continu...
Similar Datasheet