Document
LS3C0
Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 3A
Features
• Schottky barrier diodes • Low forward voltage drop • Low leakage current • Moisture sensitivity: level 1, per J-STD-020 • Solder dip 260 °C, 10 s • Low profile, typical thickness 1.0mm • AEC-Q101 qualified
eSGB (SMAF)
Typical Applications
For use in low voltage,high freqency inverters,free wheeling, and polarity protection application
Maximum Ratings (TA = 25 °C unless otherwise noted)
Parameter
Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature
Symbol
VRRM VRMS VDC IF(AV)
IFSM
TJ, TSTG
LS3C0
200 140 200 3.0
100
- 55 to + 150
Unit
V V V A
A
°C
Electrical Characteristics (TA = 25 °C unless otherwise noted)
Parameter
Test Conditions Symbol
TYP
Instantaneous forward voltage IF=3A, TA=25℃ VF
-
Maximum DC reverse current at rated DC blocking voltage
TA=25℃ TA=125℃
IR
50 10
Typical junction capacitance
4.0 V, 1 MHz
CJ
69
Typical thermal resistance
juntion to lead
RθJL1)
20
Note1:Thermal resistance from junction to lead,mounted on PCB with 30.0×30.0mm copper pads
MAX 0.87
Unit
Volts uA mA pF ℃/W
www.goodark.com
1/4
2014.09-Rev.A
LS3C0
Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 3A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 1.Forward Current Derating Curve
Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current
Figure 3. Typical Reverse Characteristics
Figure 4. Typical Junction Capacitance
Figure 5. Typical Instantaneous Forward Characteristics
www.goodark.com
2/4
2014.09-Rev.A
LS3C0
Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 3A
Package Outline Dimensions
in inches (millimeters)
DIM Unit: mm
Unit: inch
MIN MAX MIN MAX
A 0.92 1.08 0.036 0.043
A1 0 0.1 0.000 0.004
B 1.25 1.45 0.049 0.057
C 0.1 0.25 0.004 0.010
D 2.6 2.8 0.102 0.110
E 4.1 4.3 0.161 0.169
L 0.7 1.1 0.028 0.043
HE 4.8 5.2 0.189 0.205
Soldering footprint
Packing Information
Packing quantities: 10,000 pcs/Reel,12mm Tape, 13" Reel
Tape & Reel Specification
www.goodark.com
3/4
2014.09-Rev.A
LS3C0
Surface Mount Schottky Rectifier Reverse Voltage 200V Forward Current 3A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou GoodArk Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein.
www.goodark.com
4/4
2014.09-Rev.A
.