ESD Protection Diode
ESD8018
ESD Protection Diode
Low Capacitance Array for High Speed Data Lines
The ESD8018 surge protection is specifical...
Description
ESD8018
ESD Protection Diode
Low Capacitance Array for High Speed Data Lines
The ESD8018 surge protection is specifically designed to protect four high speed data points from ESD. Ultra−low capacitance and low ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines. The flow−through style package allows for easy PCB layout and matched trace lengths necessary to maintain consistent impedance between high speed differential lines.
Features
Low Capacitance (0.32 pF Max, I/O to GND) Protection for the Following IEC Standards:
IEC 61000−4−2 (Level 4) IEC 61000−4−5 (Lightning) 5A (8/20 ms)
Low ESD Clamping Voltage These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
V−by−One HS LVDS USB 3.1 Type C 10 GbE
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range TJ −55 to +125 °C
Storage Temperature Range
Tstg − 55 to +150 °C
Lead Solder Temperature − Maximum (10 Seconds)
TL 260 °C
IEC 61000−4−2 Contact (ESD) IEC 61000−4−2 Air (ESD)
ESD ESD
±17 kV ±17 kV
Maximum Peak Pulse Current 8/20 ms @ TA = 25°C (I/O−GND)
IPP 5.0 A
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.
www.onsemi.com
MARKING DIAGRAM
UDFN10 CASE 517CY
AAMG G
AA = Specifi...
Similar Datasheet