PPJA3417
20V P-Channel Enhancement Mode MOSFET
Voltage
-20 V Current
-5.2A
Features
RDS(ON) ,
[email protected],
[email protected]<35mΩ RDS(ON) ,
[email protected],
[email protected]<40mΩ RDS(ON) ,
[email protected],
[email protected]<50mΩ Advanced Trench Process Technology Specially Designed for Switch Load, PWM Application, etc Lead free in compliance with EU RoHS 2011/65/EU
directive. Green molding compound as per IEC61249 Std.
(Halogen Free)
Mechanical Data
Case: SC-59 Package Terminals : Solderable per MIL-STD-750, Method 2026 Marking: A17
SC-59
Unit : inch(mm)
Maximum
Ratings
and
Thermal
Characteristics
o
(TA=25 C
unless
otherwise
noted)
PARAMETER
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current Pulsed Drain Current
Power Dissipation
Ta=25oC Derate above 25oC
Operating Junction and Storage Temperature Range
Typical Thermal resistance - Junction to Ambient (Note 3)
SYMBOL VDS VGS ID IDM
PD
TJ,TSTG
RθJA
LIMIT -20 +8 -5.2 -20.8 1.25 10
-55~150
100
UNITS V V A A W
mW/ oC oC
oC/W
October 22,2015-REV.00
Page 1
PPJA3417
Electrical
Characteristics
o
(TA=25 C
unless
otherwise
noted)
PARAMETER Static Drain-Source Breakdown Voltage Gate Threshold Voltage
Drain-Source On-State Resistance
Zero Gate Voltage Drain Current Gate-Source Leakage Current Dynamic (Note 5) Total Gate Charge Gate-Source Charge Gate-Drain Charge Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Drain-Source Diode Maximum Continuous Drain-Source Diode Forward Current
SYMBOL
BVDSS VGS(th)
RDS(on)
IDSS IGSS
Qg Qgs Qgd Ciss Coss Crss td(on) tr td(off) tf
IS
TEST CONDITION
VGS=0V, ID=-250uA VDS=VGS, ID=-250uA VGS=-4.5V, ID=-5.2A VGS=-2.5V, ID=-3.7A VGS=-1.8V, ID=-2.5A VDS=-20V, VGS=0V VGS=+8V, VDS=0V
VDS=-10V, ID=-5.2A, VGS=-4.5V (Note 1,2)
VDS=-10V, VGS=0V, f=1.0MHZ
VDD=-10V, ID=-5.2A, VGS=-4.5V, RG=6Ω (Note 1,2)
---
Diode Forward Voltage
VSD IS=-1.0A, VGS=0V
MIN. TYP. MAX. UNITS
-20 -0.35
-
-0.59
29 33 40 -0.01 +10
-0.9 35 40 50 -1 +100
V V
mΩ
uA nA
- 18.9 - 2.8 - 4.2 - 1758 - 153 - 125 - 12 - 68 - 82 - 35 -
nC pF ns
- - -1.5 A - -0.69 -1.2 V
NOTES : 1. Pulse width<300us, Duty cycle<2% 2. Essentially independent of operating temperature typical characteristics. 3. RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins mounted on a 1 inch FR-4 with 2oz. square pad of copper 4. The maximum current rating is package limited 5. Guaranteed by design, not subject to production testing.
October 22,2015-REV.00
Page 2
PPJA3417
TYPICAL CHARACTERISTIC CURVES
Fig.1 On-Region Characteristics
Fig.2 Transfer Characteristics
Fig.3 On-Resistance vs. Drain Current
Fig.4 On-Resistance vs. Junction temperature
Fig.5 On-Resistance Variation with VGS. October 22,2015-REV.00
Fig.6 Body Diode Characteristics
Page 3
PPJA3417
TYPICAL CHARACTERISTIC CURVES
Fig.7 Gate-Charge Characteristics
Fig.8 Threshold Voltage Variation with Temperature
Fig.9 Capacitance vs. Drain-Source Voltage.
October 22,2015-REV.00
Page 4
PPJA3417
PART NO PACKING CODE VERSION
Part No Packing Code PJA3417_R1_00001
Package Type SC-59
Packing type 3K pcs / 7” reel
Marking A17
Version Halogen free
MOUNTING PAD LAYOUT
October 22,2015-REV.00
Page 5
PPJA3417
Disclaimer
● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document.
● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.
● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.
.