Document
PPJE5V0M1FN2
Low Capacitance TVS/ESD Protection
VRWM
5V
Features
Bidirectional ESD protection of one line IEC61000-4-2(ESD): ±15kV Air, ±8kV Contact Compliance IEC61000-4-4(EFT): 20A(5/50nS) IEC61000-4-5(Lightning): 2A(8/20S) Low leakage current, maximum of 0.5A at rated voltage Lead free in compliance with EU RoHS 2011/65/EU directive. Green molding compound as per IEC61249 Std.
(Halogen Free)
Mechanical Data
Case: DFN 2L, Plastic Terminals: Solderable per MIL-STD-750, Method 2026 Approx. Weight: 0.00004 ounces, 0.0011 grams Marking: 4B
Applications
Mobile Phones and accessories Desktops, Servers and Notebook Hand held portable Digital Cameras Computer Interfaces Protection Serial and Parallel Ports Protection Control Signal Lines Protection
Fig.30(Top View)
Maximum
Ratings
o
(TA=25 C
unless
otherwise
noted)
PARAMETER ESD IEC61000-4-2(Air) ESD IEC61000-4-2(Contact) Operating Junction Temperature Storage Temperature Range
SYMBOL
VESD TJ
TSTG
LIMIT ±15 ±8 -55 to +125 -55 to +150
UNITS
kV oC oC
July 14,2015-REV.01
Page 1
PPJE5V0M1FN2
Electrical
Characteristics
o
(TA=25 C
unless
otherwise
noted)
PARAMETER Reverse Stand-Off Voltage Reverse Breakdown Voltage Reverse leakage current
Clamping Voltage
Clamping Voltage TLP(Note 1)
Dynamic Resistance(Note 1) Off State Junction Capacitance
SYMBOL VRWM VBR IR
VCL
VCL
RDYN CJ
TEST CONDITION IBR=1mA VR=5V IPP=1A, tP=8/20s IPP=2A, tP=8/20s IPP=4A, tP=100ns IPP=8A, tP=100ns tP=100ns 0Vdc Bias f=1MHz
MIN. -
6.2 -
-
TYP. -
9 10.3 0.33 -
MAX. 5 7.2 0.5 9 10 15
UNITS V V A
V
V
pF
NOTES : 1. Testing using Transmission Line Pulse (TLP) conditions: Z0 = 50Ω , tP = 100 ns.
July 14,2015-REV.01
Page 2
PPJE5V0M1FN2
TYPICAL CHARACTERISTIC CURVES
Fig.1 Typical Junction Capacitance
Fig2 Transmission Line Pulsing (TLP) Measurement
Fig.3 Typical Peak Clamping Voltage(8/20s)
Fig.4 8/20s Pulse Waveform
July 14,2015-REV.01
Page 3
PPJE5V0M1FN2
PART NO PACKING CODE VERSION
Part No Packing Code
Package Type
PJE5V0M1FN2_R1_00001
DFN 2L
Packing type 8K pcs / 7” reel
Marking 4B
Version Halogen free
MOUNTING PAD LAYOUT
July 14,2015-REV.01
Page 4
PPJE5V0M1FN2
Disclaimer
● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document.
● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.
● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.
July 14,2015-REV.01
Page 5
.