Weight: 0:30 g
Unit: mm
AND114Y
AND114Y/YP
Standard Bright LED LAMPS
Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with
the design of equipment incorporating this product.
ø5.8 ± 0.2
2.5 max including resin
ø5.0 ± 0.2
(1) 7.6 12.75 ±0.5
Cathode 0.5 Index
1.5 21.1
2.54 Cathode Index
0.5
12
1. Anode 2. Cathode
AND114YP
ø5.8 ± 0.2
ø5.0 ± 0.2
AND114Y/YP
Standard LED T-1 3/4 Package (5 mm)
Features
• Low power requirement • Flush-mount • All plastic molded lens • Color: GaAsP–Yellow
• RoHS Compliant
Optical Characteristics (Ta = 25°C)
Color
LED
Lens
Lens Desc.
Axial Luminous Intensity (mcd)
Min. Typ.
Test Condition
(IF–mA)
Yellow
Yellow
Diffused
5
18
10
Viewing Angle 2θ1/2 (deg)
60
(1) 0.5
1.5 26.5 7.6
2.5 max including resin
Absolute Maximum Ratings (Ta = 25°C)
0.5
2.54 Cathode Index
12
1. Anode 2. Cathode
Characteristics
Forward Current (DC) Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Range
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width
Symbol
VF IR λp λ
Test Condition
IF = 20mA VR = 5 V IF = 15mA IF = 15mA
Min. – – – –
Symbol
IF VR PD TOpr TStg
Yellow Typ. 2.1
– 590 35
Rating (Yellow)
30 5 105 -40 to +85 -40 to +85
Max. 2.5 10 – –
Unit mA V mW °C °C
Unit
V µA nm nm
Precaution
Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the
body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be
performed after the lead forming.
7/18/07
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 •
[email protected]
www.purdyelectronics.com
1
Standard LED
AND114Y/YP
Standard Bright LED LAMPS
Forward Current IF (mA)
50 30 TA = 25°C 20
10
IF vs. VF
5
3 2
1 1.7 1.8 1.9 2.0 2.1 2.2 2.3
Forward Voltage VF (V)
IV vs. IF 5
Relative Luminous Intensity IV
2 1 0.5
0.2 0.1
12
5 10 20
50
Forward Current IF (mA)
This graph shows relative luminous vs. forward current. At three points (IF = 10, 15, 20mA) each relation is normalized.)
Radiation Pattern
20° 10° 30° 40°
50°
0° 10° 20°
30° 40° 50°
60° 60°
70° 70°
80° 80°
90° 90° 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0
Relative Luminous Intensity
Relative Luminous Intensity – Wavelength 1.0
0.8
0.6 0.4
0.2
0 560
580 600 620 640 Wavelength λ (nm)
660
IV vs. TC 3
2
IV vs.TA 40
30
Allowable Forward Current IF (mA)
Relative Luminous Intensity IV
1 20
0.5 0.4 0.3
-20
0 20 40 60 Case Temperature TC (°C)
80
10
0 0 20 40 60 80 100 Ambient Temperature TA (°C)
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
2
Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronic.