Standard LED
Hi
Weight: 0:30 g
Unit: mm
AND114S
Standard LED
T-1 3/4 Package (5 mm)
AND114S
High efficiency Bright LED LAMP
Feat...
Description
Hi
Weight: 0:30 g
Unit: mm
AND114S
Standard LED
T-1 3/4 Package (5 mm)
AND114S
High efficiency Bright LED LAMP
Features
Low power requirement Flush-mount All plastic molded lens Color: GaAsP–Red
Optical Characteristics (Ta = 25°C)
Color
LED
Lens
Lens Desc.
Axial Luminous Intensity (mcd)
Min. Typ.
Test Condition
(IF–mA)
Red
Red
Diffused
20
50
10
Viewing Angle 2θ1/2 (deg)
60
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Forward Current (DC) Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Range
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width
Symbol
VF IR λp λ
Test Condition
IF = 20mA VR = 5 V IF = 15mA IF = 15mA
Min. – – – –
Symbol IF VR PD
TOpr TStg
Yellow Typ. 2.0
– 627 45
Rating (Yellow)
30 5 75 -40 to +85 -40 to +85
Max. 2.5 10 – –
Unit mA V mW °C °C
Unit V µA nm nm
Precaution
Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the
body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be
performed after the lead forming.
Purdy Electronics Corporation 720 Palomar Avenue Sunnyvale, CA 94086
Tel: 408.523.8200 Fax: 408.733.1287 email@purdyelectronics.com www.purdyelectronics.com
4/7/00
Standard LED High Efficiency Red
AND114S
High Bright L...
Similar Datasheet