PWM Constant-Current Control Stepping Motor Driver
Ordering number : ENA1674A
LV8712T
Bi-CMOS LSI
PWM Constant-Current Control Stepping Motor Driver
http://onsemi.com
O...
Description
Ordering number : ENA1674A
LV8712T
Bi-CMOS LSI
PWM Constant-Current Control Stepping Motor Driver
http://onsemi.com
Overview
The LV8712T is a stepping motor driver of the micro-step drive corresponding to supports 2W 1-2 phase excitation. It is the best for the drive of the stepping motor for a scanner and a small printer.
Features
Single-channel PWM constant-current control stepping motor driver incorporated.
Excitation mode can be set to 2-phase, 1-2 phase, W1-2 phase , or 2W1-2 phase
Microstep can control easily by the CLK-IN input.
Power-supply voltage of motor
: VM max = 18V
Output current
: IO max = 0.8A
Output ON resistance
: RON = 1.1Ω (upper and lower total, typical, Ta = 25°C )
A thermal shutdown circuit and a low voltage detecting circuit are built into.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Motor supply voltage Logic supply voltage Output peak current Output continuousness current Logic input voltage Allowable power dissipation Operating temperature Storage temperature
Symbol VM max VCC max IO peak IO max VIN Pd max Topr Tstg
Conditions
Each 1ch, tw ≤ 10ms, duty 20% Each 1ch *
* Specified circuit board : 57.0mm×57.0mm×1.7mm, glass epoxy 2-layer board.
Ratings 18 6 1.0
800 -0.3 to VCC + 0.3
1.35 -20 to +85 -55 to +150
Unit V V A mA V W °C °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is ...
Similar Datasheet