10-Bit VCM Driver for Autofocus
10-bit VCM driver for autofocus
ARC and ESRC enabled for fast autofocus capture
Available in 2 × 3 array, 1.1 mm2 WLCSP
2-wire (I2C-compatible), 1.8 V serial interface
10-bit resolution DAC
100 mA output current sink
Integrated current sense resistor
2.3 V to 3.6 V power supply
Guaranteed monotonic over all codes
Power-down to 5 µA maximum
Ultralow noise preamplifier
Camera enabled PDA
The AD58231 and AD5823-1 are single, 10-bit DACs with 100 mA
output current sink capability and integrated Actuator Response
Control™ (ARC™) technology. ARC is a revolutionary autofocus
capture time and image quality enhancing technology developed by
Analog Devices, Inc., and integrated into the AD5823/AD5823-1
ARC circuitry applies specialized, patented waveform and appli-
cation technology to underdamped voice coil motors (VCMs)
to reduce mechanical ringing. This technology enables the user
to achieve very fast mechanical settling times and, as a result,
greatly enhances autofocus capture times, image quality, and
The AD5823/AD5823-1 feature an internal reference and
operate from a single 2.3 V to 3.6 V supply. The DAC is
controlled via a 2-wire (I2C-compatible) serial interface that
operates at clock rates up to 400 kHz. The 7-bit I2C address
for the AD5823/AD5823-1 is 0xC.
FUNCTIONAL BLOCK DIAGRAM
The AD5823/AD5823-1 also incorporate a power-on reset
circuit, which ensures that the DAC output powers up to 0 V
and remains at 0 V until a valid write takes place. To ensure that
minimal power is consumed in shutdown mode, the user can
select the power-down polarity: the AD5823 SHUTDOWN pin
is active low; the AD5823-1 SHUTDOWN pin is active high.
The AD5823/AD5823-1 were designed for autofocus applica-
tions in camera modules, camera phones, digital still cameras,
The AD5823/AD5823-1 have many industrial applications, such
as controlling temperature, light, and movement over the
temperature range of −40°C to +85°C without derating.
1 Protected by U.S. Patent 5,969,657; other patents pending.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityis assumedbyAnalogDevicesfor itsuse, norfor any infringementsof patentsorother
rightsofthirdpartiesthatmayresultfrom itsuse.Specificationssubjecttochange withoutnotice.No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks are the property of their respectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
©2010 Analog Devices, Inc. All rights reserved.