2-WIRE SERIAL E2PROM
NOT RECOMMENDED FOR NEW DESIGN
S-24C01C/02C
www.sii-ic.com © Seiko Instruments Inc., 2008-2011
2-WIRE SERIAL E2PROM
R...
Description
NOT RECOMMENDED FOR NEW DESIGN
S-24C01C/02C
www.sii-ic.com © Seiko Instruments Inc., 2008-2011
2-WIRE SERIAL E2PROM
Rev.4.0_00_C
The S-24C01C/02C is a 2-wire, low current consumption and wide range operation serial E2PROM. The S-24C01C/02C has the capacity of 1 K-bit and 2 K-bit, and the organization is 128 words × 8-bit, 256 words × 8-bit, respectively. Page write and sequential read are available.
Features
Operating voltage range Read:
1.6 V to 5.5 V
Write:
1.7 V to 5.5 V
Page write:
16 bytes / page
Sequential read
Operation frequency: Write time:
400 kHz (VCC = 1.6 V to 5.5 V) 5.0 ms max.
Noise suppression:
Schmitt trigger and noise filter on input pins (SCL, SDA)
Write protect function during the low power supply voltage
Endurance:
106cycles / word*1 (Ta = +25°C)
Data retention:
100 years (Ta = +25°C)
Memory capacity
S-24C01C: 1 K-bit
S-24C02C: 2 K-bit
Write protect:
100%
Initial shipment data:
FFh
Lead-free (Sn 100%), halogen-free*2
*1. For each address (Word: 8-bit) *2. Refer to “ Product Name Structure” for details.
Packages
8-Pin SOP (JEDEC) 8-Pin TSSOP TMSOP-8 SNT-8A
Caution This product is intended to use in general electronic devices such as consumer electronics, office equipment, and communications devices. Before using the product in medical equipment or automobile equipment including car audio, keyless entry and engine control unit, contact to SII is indispensable.
Seiko Instruments Inc.
1
...
Similar Datasheet