CMOS Quad TRISTATE Differential Line Driver
IL34C87
CMOS Quad TRISTATE Differential Line Driver.
General Description The IL34C87T is a quad differential line driv...
Description
IL34C87
CMOS Quad TRISTATE Differential Line Driver.
General Description The IL34C87T is a quad differential line driver designed for digital data transmission over balanced lines. The IL34C87T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS. This enables the construction of serial and terminal interfaces while maintaining minimal power consumption. The IL34C87T accepts TTL or CMOS input levels and translates these to RS-422 output levels. This part uses special output circuitry that enables the individual drivers to power down without loading down the bus. This device has separate enable circuitry for each pair of the four drivers. All inputs are protected against damage due to electrostatic discharge by diodes to VCC and ground. Pinning
Designation Of microcircuit in package
IL34C86N Plastic DIP IL34C86D SOIC
TA from minus 40 to plus 85 °C
Pin Symbol
Description
Pin configuration.
01 A 02 A1
Input of driver A Output А
A 01
16 VCC
03 A2
Inverted output А
04
En A/B
input of switching outputs
of A and B receivers into
the third state
05 B2
Inverted output B
A1 02 A2 03 En A/B 04
15 D 14 D1 13 D2
06 B1
Output B
B2 05
12 En C/D
07 B
Input of driver B
08 GND
General pin
B1 06
11 C2
09 C
Input of driver C
B 07
10 C1
10 C1 11 C2
Output C Inverted output C
GND 08
09 C
12
En C/D
input of switching outputs
13 D2
of C and D receivers into Features
the third state
TTL input compatible...
Similar Datasheet