750kHz - 800MHz Low Phase Noise VCXO
PL502-30
750kHz – 800MHz Low Phase Noise VCXO (for 12 to 25MHz Crystals)
FE AT UR E S
750kHz to 800MHz output range ...
Description
PL502-30
750kHz – 800MHz Low Phase Noise VCXO (for 12 to 25MHz Crystals)
FE AT UR E S
750kHz to 800MHz output range Low phase noise output
-127dBc/Hz for 155.52MHz @ 10kHz offset -115dBc/Hz for 622.08MHz @ 10kHz offset Selectable LVCMOS, LVPECL or LVDS output Selectable High Drive or Standard Drive LVCMOS 12MHz to 25MHz crystal input No external load capacitor or varicap required Output Enable selector Wide pull range (±200ppm) 3.3V operation Available in Die form (65 mil x 62 mil)
62 mil
DIE CONFIGURATION
65 mil
OUTSEL0^ VDD VDD VDD VDD SEL0^ SEL1^ OUTSEL1^
(1550,1475)
25 24 23 22 21 20 19 18 17 GNDBUF
XIN 26 XOUT 27
Die ID: B3535-43
16 LVCMOS 15 LVDSB
SEL3^ 28
14 LVPECLB
SEL2^ 29
13 VDDBUF 12 VDDBUF
OE_CTRL 30
C502
11 LVPECL 10 LVDS
VCON 31
9 OE_SEL^
12345 6 78
GND GND GND GND GND
N/C GND GNDBUF
DESCRIPTION The PL502-30 is a monolithic low jitter and low phase noise VCXO IC with LVCMOS, LVDS and LVPECL output capabilities, covering the 750kHz to 800MHz output range. It allows the control of the output frequency with an input voltage (VCON), using a low cost 12MHz to 25MHz crystal. This one IC can be used to produce a VCXO with output frequencies ranging from FXIN / 16 to FXIN x 32 thanks to the four frequency selector pads. This makes the PL502-30 ideal as a universal die for applications ranging from ADSL to SONET.
Y X
(0,0)
Note: ^ denotes internal pull up
OUTPUT SELECTION AND ENABLE
OUTSEL1 OUTSEL0 (Pad #18) (Pad #25)
Sel...
Similar Datasheet