SA5.0

SA SERIES Features Transient Voltage Suppressor Diodes Voltage Range 5.0 to 170 Volts 500 Watts Peak Power 1.0 Watt Steady State DO-15 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 500W surge capability at 10 X 10us waveform, duty cycle: 0.01% Excellent clamping capability Low zener impedance Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional Typical IR less than 1μA above 10V High temperature soldering guaranteed: 260°C / 10 seconds / .375”,(9.5mm) lead length / 5lbs.,(2.3kg) tension Mechanical Data Case: Molded plastic Lead: Axial leads, solderable per MIL-STDLead: 202, Method 208 Polarity: Color band denotes cathode except bipolar Weight: 0.34 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Type Number Peak Power Dissipation at TA=25OC, Tp=1ms (Note 1) Symbol PPK Value Minimum 500 Units Watts Steady State Power Dissipation at TL=75 °C Lead Lengths .375”, 9.5mm (Note 2) PD 1.0 Watts Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 3) Maximum Instantaneous Forward Voltage at 35.0A for Unidirectional Only IFSM VF 70 Amps 3.5 Volts Operating and Storage Temperature Range TJ, TSTG -55 to + 175 Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25OC Per Fig. 2. °C Notes: 2. Mounted o...