DatasheetsPDF.com

1SMB2EZ47 Dataheets PDF



Part Number 1SMB2EZ47
Manufacturers Pan Jit International Inc.
Logo Pan Jit International Inc.
Description SURFACE MOUNT SILICON ZENER DIODE
Datasheet 1SMB2EZ47 Datasheet1SMB2EZ47 Datasheet (PDF)

1SMB2EZ11 THRU 1SMB2EZ200 SURFACE MOUNT SILICON ZENER DIODE VOLTAGE - 11 TO 200 Volts Power - 2.0 Watts FEATURES l Low profile package l Built-in strain relief l l l l l l Glass passivated junction Low inductance Excellent clamping capability Typical ID less than 1 £g A above 11V High temperature soldering : 260 ¢J /10 seconds at terminals Plastic package has Underwriters Laboratory Flammability Classification 94V-O DO-214AA MECHANICAL DATA Case: JEDEC DO-214AA, Molded plastic over passivated .

  1SMB2EZ47   1SMB2EZ47


Document
1SMB2EZ11 THRU 1SMB2EZ200 SURFACE MOUNT SILICON ZENER DIODE VOLTAGE - 11 TO 200 Volts Power - 2.0 Watts FEATURES l Low profile package l Built-in strain relief l l l l l l Glass passivated junction Low inductance Excellent clamping capability Typical ID less than 1 £g A above 11V High temperature soldering : 260 ¢J /10 seconds at terminals Plastic package has Underwriters Laboratory Flammability Classification 94V-O DO-214AA MECHANICAL DATA Case: JEDEC DO-214AA, Molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes positive end (cathode) except Brdirectional Standard Packaging: 12mm tape (EIA-481) Weight: 0.003 ounce, 0.093 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. SYMBOL Peak Pulse Power Dissipation (Note A) PD Derate above 75 ¢J Peak forward Surge Current 8.3ms single half sine-wave superimposed on rated IFSM load(JEDEC Method) (Note B) Operating Junction and Storage Temperature Range TJ,TSTG NOTES: A. Mounted on 5.0mm (.013mm thick) land areas. B. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. 2 VALUE 2 24 15 -55 to +150 UNITS Watts mW/¢J Amps ¢J 1SMB2EZ11 THRU 1SMB2EZ200 ELECTRICAL CHARACTERISTICS (T A=25 ¢J unless otherwise noted) VF=1.2 V max , IF=500 mA for all types Type No. (Note 1.) 1SMB2EZ11 1SMB2EZ12 1SMB2EZ13 1SMB2EZ14 1SMB2EZ15 1SMB2EZ16 1SMB2EZ17 1SMB2EZ18 1SMB2EZ19 1SMB2EZ20 1SMB2EZ22 1SMB2EZ24 1SMB2EZ27 1SMB2EZ30 1SMB2EZ33 1SMB2EZ36 1SMB2EZ39 1SMB2EZ43 1SMB2EZ47 1SMB2EZ51 1SMB2EZ56 1SMB2EZ62 1SMB2EZ68 1SMB2EZ75 1SMB2EZ82 1SMB2EZ91 1SMB2EZ100 1SMB2EZ110 1SMB2EZ120 1SMB2EZ130 1SMB2EZ140 1SMB2EZ150 1SMB2EZ160 1SMB2EZ170 1SMB2EZ180 1SMB2EZ190 1SMB2EZ200 Nominal Zener Voltage Vz @ IZT volts (Note 2.) 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 22.0 24.0 27.0 30.0 33.0 36.0 39.0 43.0 47.0 51.0 56.0 62.0 68.0 75.0 82.0 91.0 100.0 110.0 120.0 130.0 140.0 150.0 160.0 170.0 180.0 190.0 200.0 Test Maximum Zener Surge Current current IZT Maximum Zener Impedance (Note 3.) Leakage Current Current @ TA = 25 ¢J mA IZM ir - mA Z ZT @ IZT ZZk @ IZK IZK IR VR mA (Note 4.) £g A Max @ Volts Ohms Ohms mA 45.5 41.5 38.5 35.7 33.4 31.2 29.4 27.8 26.3 25.0 22.8 20.8 18.5 16.6 15.1 13.9 12.8 11.6 10.6 9.8 9.0 8.1 7.4 6.7 6.1 5.5 5.0 4.5 4.2 3.8 3.6 3.3 3.1 2.9 2.8 2.6 2.5 4.0 4.5 5.0 5.5 7.0 8.0 9.0 10.0 11.0 11.0 12.0 13.0 18.0 20.0 23.0 25.0 30.0 35.0 40.0 48.0 55.0 60.0 75.0 90.0 100.0 125.0 175.0 250.0 325.0 400.0 500.0 575.0 650.0 675.0 725.0 825.0 900.0 700 700 700 700 700 700 750 750 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 3000 3000 3000 4000 4500 5000 5500 6000 6500 7000 7000 8000 8000 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 1.0 1.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 8.4 9.1 9.9 10.6 11.4 12.2 13.0 13.7 14.4 15.2 16.7 18.2 20.6 22.5 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56.0 62.2 69.2 76.0 83.6 91.2 98.8 106.4 114.0 121.6 130.4 136.8 144.8 152.0 166 152 138 130 122 114 107 100 95 90 82 76 68 60 55 50 47 43 39 36 32 29 27 24 22 20 18 17 15 14 13 12 11 11 10 10 9 1.82 1.66 1.54 1.43 1.33 1.25 1.18 1.11 1.05 1.00 0.91 0.83 0.74 0.67 0.61 0.56 0.51 0.45 0.42 0.39 0.36 0.32 0.29 0.27 0.24 0.22 0.20 0.18 0.16 0.15 0.14 0.13 0.12 0.12 0.11 0.10 0.10 NOTES: 1. TOLERANCES - Suffix indicates 5% tolerance any other tolerance will be considered as a special device. 2. ZENER VOLTAGE (Vz) MEASUREMENT - guarantees the zener voltage when measured at 40 ms ¡Ó 10ms from the diode body, and an ambient temperature of 25 ¢J (¡Ï 8 ¢J , -2 ¢J ). 3.ZENER IMPEDANCE (Zz) DERIVATION - The zener impedance is derived from the 60 cycle ac voltage, which results when an ac current having an rms falue equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. 4. SURGE CURRENT (Ir) NON-REPETITIVE - The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC standards, however, actual device capability is as described in Figure 3. RATING AND CHARACTERISTICS CURVES 1SMB2EZ11 THRU 1SMB2EZ200 £c JL (t,D) TRANSIENT THERMAL RESISTANCE JUNCTION-TO-LEAD(¢J /W) 30 20 10 7 5 3 2 1 0.7 0.5 0.05 0.02 NOTE BELOW 0.1 SECOND, THERMAL RESPONSE CURVE IS APPLICABLE TO ANY LEAD LENGTH (L) 0.002 0.005 0.01 0.02 0.05 D = 0.5 0.2 0.1 0.01 0.0002 0.3 0.0001 D=0 0.0005 0.001 SINGLE PULSE £GTJL = £KJL(t)PPK REPETITIVE PULSES £GTJL = £KJL(t,D)PPK 0.1 0.2 0.5 1 2 5 10 Fig. 2-TYPICAL THERMAL RESPONSE L, PPK, PEAK SURGE POWER(WATTS) 500 250 150 100 5.


1SMB2EZ43 1SMB2EZ47 1SMB2EZ51


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)