Document
www.yslcd.com.tw
Product Specification
AU OPTRONICS CORPORATION
( V ) Preliminary Specifications ( ) Final Specifications
Module
Model Name Note
11.6” 16:9 Color TFT-LCD with LED Backlight design
B116XAN01.0 (H/W:2A)
LED Backlight with New Digitizer Design
Customer
Date
Approved by
Date
Checked & Approved by
Date
Kevin KH Shen 10/05/2012 Prepared by Erica YT Lin 10/05/2012
Note: This Specification is subject to change without notice.
DMPBU Marketing Division AU Optronics corporation
B116XAN01.0 Document Version : 0.3
1 of 39
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page 0.1 07/27/2012 0.2 08/28/2012 6 0.3 10/05/2012 4
32&33
Old description Contrast ratio 800typ
New Description 1st version Update Chromaticity Contrast ratio 800 min Update 2D drawing
Remark
www.yslcd.com.tw
B116XAN01.0 Document Version : 0.3
2 of 39
www.yslcd.com.tw
Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling. 7) Do not open nor modify the Module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module. 11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. 12)Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. 13)Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that a LED light bar build in as a light source of back light unit. It can prevent electrostic breakdown.
B116XAN01.0 Document Version : 0.3
3 of 39
www.yslcd.com.tw
Product Specification
AU OPTRONICS CORPORATION
2. General Description
B116XAN01 V0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 16:9 WXGA, 1366(H) x768(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight driving circuit. All input signals are MIPI interface compatible.
B116XAN01 V0 is designed for a display unit of notebook style personal computer and industrial machine.
2.1 General Specification 2.1.1 Panel General Specification
Items Screen Diagona Active Area Pixels H x V Pixel Pitch Pixel Format Display Mode White Luminance (ILED=12mA/18.5mA) (Note: ILED is LED current) Luminance Uniformity Contrast Ratio Response Time Nominal Input Voltage VDD
Power Consumption
Weight
Unit [mm] [mm]
Specifications 293.83 (11.6W”) 256.125 (H) x 144(V)
1366 x 3(RGB) x 768
[mm] 0.1875 X 0.1875
R.G.B. Vertical Stripe
Normally Black
450 typ. (5 points average) [cd/m2]
700 typ. (5 points average)
[ms] [Volt]
1.25 max. (5 points) 1.5 max (13 points)
800 min 30 Max
+3.3 typ.
Logic Power: 0.7W
BLU Power: 1.69W [Watt]
Logic Power: 0.7W
BLU Power: 2.69W
450nit (typ) 700nit (typ)
[Grams]
185 max (Base Panel)
Panel: 156 max Digitizer: 25 typ
B116XAN01.0 Document Version : 0.3
4 of 39
www.yslcd.com.tw
Product Specification
AU OPTRONICS CORPORATION
Physical Size (panel only)
[mm]
Length Width
Thickness (W/O PCBA)
Thickness (W/ PCBA)
Min. 266.87 157.01
---
---
Typ. 267.17 157.31
---
---
Support Color
Temperature Range Operating Storage (Non-Operating)
RoHS Compliance
16.7M colors ( RGB 8-bit ) [oC] -20 to +60 [oC] -30 to +70
RoHS Compliance
Max. 267.47 157.61
2.91
4.74
2.1.2 Digitizer General Specification
B116XAN01.0 Document Version : 0.3
5 of 39
www.yslcd.com.tw
Product Specification
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃ (Room Temperature) :
Item White Luminance
ILED=12mA White Luminance
ILED18.5mA
Viewing Angle
Luminance Uniformity Luminance Uniformity Contrast Ratio Cross talk
Symbol
Conditions 5 points average
Min. 405
5 points average 616
θR θL
Horizontal (Right) CR = 10 (Left)
---
ψH ψL
Vertical C.