Document
Product Specification
AU OPTRONICS CORPORATION
www.yslcd.com.tw
( ) Preliminary Specifications (V ) Final Specifications
Module Model Name
Note ( )
11.6”(11.58 ”) 16:9 Color TFT-LCD with LED Backlight design
B116HAN03.2 (H/W:0A )
LED Backlight without driving circuit design
Customer
Date
Approved by
Date
Checked & Approved by
Date
Kevin KH Shen
11/09/2012
Prepared by
Date
Jay Lin
11/09/2012
Note: This Specification is subject to change without notice.
DMPBU Marketing Division AU Optronics corporation
B116HAN03.2 Document Version : 0.1
1 of 33
www.yslcd.com.tw
Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions...............................................................4 2. General Description .................................................................5
2.1 General Specification
5
2.2 Optical Characteristics
6
3. Functional Block Diagram ......................................................11
4. Absolute Maximum Ratings ...................................................12
4.1 Absolute Ratings of TFT LCD Module
12
4.2 Absolute Ratings of Touch Sensor
12
4.3 Absolute Ratings of Environment
12
5.1 TFT LCD Module
13
5.2 Backlight Unit
19
6. Signal Interface Characteristic ..............................................20
6.1 Pixel Format Image
20
6.1 Integration Interface Requirement......................................21
6.2 Interface Timing
23
7. Panel Reliability Test .............................................................24
7.1 Vibration Test
24
7.2 Shock Test
24
7.3 Reliability Test
24
8. Mechanical Characteristics ....................................................25
8.1 LCM Outline Dimension
25
9. Shipping and Package............................................................27
9.1 Shipping Label Format
27
9.2 Carton Label Format
27
9.3 Carton Package
28
9.4 Shipping Package of Palletizing Sequence
29
10. Appendix .............................................................................30
10.1 EDID Description
30
B116HAN03.2 Document Version : 0.1
2 of 33
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
Old description
0.1 2012/02/01 All First Edition for Customer
New Description
Remark
www.yslcd.com.tw
B116HAN03.2 Document Version : 0.1
3 of 33
www.yslcd.com.tw
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling. 7) Do not open nor modify the Module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module. 11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. 12)Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. 13)Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that a LED light bar build in as a light source of back light unit. It can prevent electrostic breakdown.
B116HAN03.2 Document Version : 0.1
4 of 33
www.yslcd.com.tw
Product Specification
AU OPTRONICS CORPORATION
2. General Description
B116HAN03 V2 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a driver circuit, and LED backlight system. The screen format is intended to support the 16:9 , 1920(H) x1080(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight driving circuit. All input signals are eDP interface compatible.
B116HAN03 V2 is designed for a display unit of notebook style personal computer and industrial machine.
2.1 General Specification
℃The following items are characteristics summary on the table at 25 condition:
Items Screen Diagonal Active Area Pixels H x V Pixel Pitch Pixel Format Display Mode White Luminance (ILED=19mA)
(Note: ILED is LED current)
Luminance Uniformity Contrast Ratio Response Time Nominal Input Volta.