Document
SL32A thru SL310A
Surface Mount Schottky Rectifier Reverse Voltage 20 - 100V Forward Current 3A
FEATURES
• Ideal for automated placement • Low forward voltage drop • Low leakage current • Meets environmental standard MIL-S-19500D • Moisture sensitivity:level 1, per J-STD-020 • Solder dip 275 °C, 10s • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC
APPLICATIONS For use in general purpose rectification of lighting, power supplies, inverters, converters and freewheeling diodes for consumer, automotive and telecommunication.
Package: DO-214AC(SMA)
PRIMARY CHARACTERISTICS
IF(AV)
3A
VRRM
20 V to 100 V
IFSM
80A
VF 0.42V 0.5V 0.75V
TJ max.
125 °C 150 °C
MECHANICAL DATA Case: DO-214AC, molded epoxy body Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22B-106 Polarity: Laser Band Denotes Cathode Band
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Maximum repetitive peak reverse voltage
Maximum RMS voltage
SYMBOL VRRM VRMS
SL32A 20 14
SL33A 30 21
SL34A 40 28
SL35A 50 35
SL36A 60 42
SL37A 70 49
SL38A 80 56
SL39A SL310A 90 100 63 70
Maximum DC blocking voltage
Maximum average forward rectified current at TL (See Fig.1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction temperature range
Storage temperature range
VDC IF(AV)
IFSM TJ Tstg
20 30 40 - 55 to + 125
50 60 70 80 3
80 - 55 to + 150
- 55 to + 150
90 100
UNIT
V V V A
A °C °C
1/3
SL32A thru SL310A
Surface Mount Schottky Rectifier Reverse Voltage 20 - 100V Forward Current 3A
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Typical junction capacitance
TEST CONDITIONS
IF=3 A
TA=25 TA=100 4.0 V, 1 MHz
SYMBOL
VF IR CJ
SL32A SL33A SL34A SL35A SL36A
0.42
0.2 50
0.5 285
SL37A
SL38A SL39A SL310A
0.75 0.05
4
UNIT V mA pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL SL32A SL33A SL34A SL35A SL36A
Maximum thermal resistance
RθJA (1) RθJT (2)
80 20
SL37A
SL38A
SL39A SL310A
UNIT °C/W
Notes: (1) Thermal resistance from junction to ambient, 0.197x 0.197 inch (5.0x5.0mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.197×0.197 inch (5.0×5.0mm) copper pads to each terminal
RATINGS AND CHARACTERISTICS CURVES (TA = 25°C unless otherwise noted)
Figure 1. Forward Current Derating Curve
Figure 2.Maximum Non‐repetitive Peak Forward Surge Current
Figure 3. Typical Instantaneous Forward Characteristics 2/3
Figure 4. Typical Reverse Characteristics
SL32A thru SL310A
Surface Mount Schottky Rectifier Reverse Voltage 20 - 100V Forward Current 3A
Figure 5. Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
www.goodarksemi.com
3/3
Doc.USSL32A-SL310Ax2.0
.