Features
● Plastic package has underwriters Laboratory Flammability Classification 94V-0
● Dual rectifier construction, ...
Features
● Plastic package has underwriters Laboratory Flammability Classification 94V-0
● Dual rectifier construction, positive center tap ● Low forward voltage, high efficiency ● Guarding for over voltage protection
MBRB10100CT
Schottky Barrier Rectifier Reverse Voltage 100 Volts Forward Current 10 Amperes
Mechanical Data
● Case: Epoxy, Molded ● Weight: 1.4grams (approximately) ● Lead temperature for soldering purposes: 260°C Max. for 10 sec ● 50 units per plastic tube or 800 per reel
Package: TO-263 (D2PAK)
Maximum Ratings & Electrical Characteristics
(TA=25°C unless otherwise noted)
PARAMETER
TEST
SYMBOL
CONDITIONS
Maximum repetitive peak reverse voltage
VRRM
Working peak reverse voltage
VRWM
Maximum DC blocking voltage
VDC
Maximum average forward rectified current at
IF(AV)
Tc=105°C total device per diode Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode
IFSM
Peak repetitive reverse current per leg at tp=2.0us ,1KHz
IRRM
Voltage rate of change(rated VR)
DV/dt
Operating junction temperature range
TJ
Storage temperature range
TSTG
Maximum instantaneous forward voltage per leg
IF=5A IF=5A
TC=25°C TC=125°C
VF
Maximum reverse current per leg at working peak Reverse voltage
TJ=25°C TJ=100°C
IR
Symbol Parameter
Thermal Characteristics TA=25°C unless otherwise noted Max.
RθJC
Thermal Resistance, Junction to Case per Leg
2.0
Note: Pulse test:300us pulse width, duty cycle=2%
VALUE
100 100 100 10 5 1...