SCHOTTKY RECTIFIER
MBR15xCT
Features:
• Plastic material. • Metal silicon rectifier, majority carrier conduction. • Low power loss, high ef...
Description
MBR15xCT
Features:
Plastic material. Metal silicon rectifier, majority carrier conduction. Low power loss, high efficiency. High current capability, low forward voltage drop. High surge capability. For use in low voltage, high frequency inverters, free wheeling, and polarity
protection applications. Guardring for over voltage protection. High temperature soldering guaranteed: 260°C/10 seconds, 0.25 inch
(6.35mm) from case.
TO-220AB
Dimensions : Inches (Millimetres)
Mechanical Data:
Cases Terminals Polarity Mounting position Mounting torque Weight
: JEDEC TO-220AB moulded plastic body. : Pure tin plated, lead free, solderable per MIL-STD-750, Method 2026. : As marked. : Any. : 5 in. - lbs. maximum. : 0.08 ounce, 2.24 grams.
Page <1>
23/07/08 V1.1
MBR15xCT
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Type Number
Symbol
Maximum Recurrent Peak Reverse Voltage
VRRM
Maximum RMS Voltage
VRMS
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current at TC = 105°C
Peak Repetitive Forward Current (Rated VR, Square Wave, 20KHz) at TC = 105°C
Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method)
I (AV) IFRM IFSM
Peak Repetitive Reverse Surge Current (Note 1)
Maximum Instantaneous Forward Voltage at: (Note 2)
IF = 7.5A, TC = 25°C ...
Similar Datasheet