EEPROM
Fremont Micro Devices
Two-Wire Serial EEPROM
2K (8-bit wide)
FT24C02A
FEATURES
Low voltage and low power operations:...
Description
Fremont Micro Devices
Two-Wire Serial EEPROM
2K (8-bit wide)
FT24C02A
FEATURES
Low voltage and low power operations: FT24C02A: VCC = 1.8V to 5.5V, Industrial temperature range (-40℃ to 85℃).
Two Versions of FT24C02A: FT24C02A-5xx: Low cost with 5 valid pins. Suitable for most application except those with more than one EEPROM on the same IIC Bus. Details in the “Device Addressing” section. FT24C02A-Uxx: 8 valid pins suitable for all application.
Maximum Standby current < 1µA (typically 0.02µA and 0.06µA @ 1.8V and 5.5V respectively). 16 bytes page write mode. Partial page write operation allowed. Internally organized: 256 × 8 (2K). Standard 2-wire bi-directional serial interface. Schmitt trigger, filtered inputs for noise protection. Self-timed programming cycle (5ms maximum). 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility. Automatic erase before write operation. Write protect pin for hardware data protection. High reliability: typically 1, 000,000 cycles endurance. 100 years data retention. Standard 8-pin PDIP/SOIC/TSSOP/DFN and 5-pin SOT-23/TSOT-23 Pb-free packages.
DESCRIPTION
The FT24C02A is 2048 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 256 words of 8 bits (1 byte) each. The devices are fabricated with proprietary advanced CMOS process for low power and low voltage applications. These devices are available in standard 8-lead PDIP, 8-lead JEDEC SOIC, 8-...
Similar Datasheet