NCL30160
1.0A Constant-Current
Buck Regulator for Driving
High Power LEDs
The NCL30160 is an NFET hysteretic step−down,...
NCL30160
1.0A Constant-Current
Buck
Regulator for Driving
High Power LEDs
The NCL30160 is an NFET hysteretic step−down, constant−current driver for high power LEDs. Ideal for automotive, industrial and general lighting applications utilizing minimal external components. The NCL30160 operates with an input voltage range from 6.3 V to 40 V. The hysteretic control gives good power supply rejection and fast response during load transients and PWM dimming to LED arrays of varying number and type. A dedicated PWM input (DIM/EN) enables wide range of pulsed dimming and a high switching frequency up to 1.4 MHz allows the use of smaller external components minimizing space and cost. Protection features include resistor−programmed constant LED current, shorted LED protection, under−voltage and thermal shutdown. The NCL30160 is available in a SOIC−8 package.
Features
Integrated 1.0A MOSFET VIN Range 6.3 V to 40 V Short LED Shutdown Protection Up to 1.4 MHz Switching Frequency No Control Loop Compensation Required Adjustable LED Current Single Pin Brightness and Enable/Disable Control Using PWM Supports All−Ceramic Output Capacitors and Capacitor−less Outputs Thermal Shutdown Protection Capable of 100% Duty Cycle Operation This is a Pb−Free Device
Typical Application
LED Driver Constant Current Source Automotive Lighting General Illumination Industrial Lighting
http://onsemi.com
8 1
SOIC−8 NB CASE 751
MARKING DIAGRAM
8 30160 ALYWX G
1
A = Assembly Loca...