www.addmtek.com
DESCRIPTION
The A711 is a high voltage, low dropout current regulator for high power LED, that the maxim...
www.addmtek.com
DESCRIPTION
The A711 is a high voltage, low dropout current
regulator for high power LED, that the maximum output current can be up to 1.1Amp. The output current was decided by an external resistor. The output sink current could be disabled via OE pin. PWM dimming function could also be controlled by OE pin.
TO-263 package is available for good power dissipation ability. Build-in thermal protection to prevent the chip from over heat damage, and adequate thermal pad PCB area is required to control the junction temperature below 125°C.
TYPICAL APPLICATION CIRCUIT
5V~50V
CBP
Enable/ PWM Dimming
RSET
OE ISET
VDD
A711
GND
OUT CO
A711
1.1A HIGH VOLTAGE ADJUSTABLE CURRENT
REGULATOR
WITH ENABLE CONTROL
FEATURES
0.8V Output Drop-out Voltage at 1.1Amp. 1.1Amp. Maximum Output Current. Output Current Controlled by External Resistor. 3us Fast Response Output Stage Enable Control. Output Pin Sustain Voltage Up To 75V. Supply Voltage Range 5V~50V. TO-263-5L package.
APPLICATIONS
High Power LED Driver RGB Full Color Power LED driver LCD Monitor/TV LED Backlight Driver LED Lighting LED Street Lamp / Table Lamp
PACKAGE PIN OUT
5 4 3 2 1
TO-263-5L (Top View)
OUT OE GND ISET VDD
5 OUT 4 OE 3 GND 2 ISET 1 VDD
TO-252-5L (Top View)
5 OUT
4 OE
3 GND
2
TO-220-5L
ISET
1 VDD (Top View)
ORDER INFORMATION
V
TO-263-5L 5 pin
P
TO-220-5L 5 pin
S
A711VFT
A711PFT
Note:
Part Number: A 7 1 1 □ □ □
Package Type. V: TO-263-5L P: TO-220-5L S: TO-252-5L
Packing.
T: Tap...