MS24185M

INCH-POUND DETAIL SPECIFICATION SHEET MS24185M 15 April 2003 SUPERSEDING MS24185L 10 Jan 1994 RELAYS, ELECTROMAGNETIC, 400 AMPERES, 1 PST (N.O.), TYPE II, NONHERMETICALLY SEALED This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the relay described herein shall consist of this specification and the latest issue of MIL-PRF-6106. FIGURE 1. Dimensions and configurations. AMSC N/A 1 of 6 DISTRIBUTION STATEMENT A. Approved for public release, distribution is unlimited. FSC 5945 MS24185M FIGURE 1. Dimensions and configurations - Continued. 2 MS24185M Inches .010 .062 .090 .125 .138 .220 .266 .375 .475 mm 0.25 1.57 2.29 3.18 3.51 5.59 6.76 9.52 12.06 Inches .500 .505 .812 1.000 1.125 1.219 1.273 1.281 2.000 mm 12.70 12.83 20.62 25.40 28.53 30.96 32.33 32.54 50.80 Inches 2.406 2.438 3.000 3.125 3.625 3.920 4.312 4.500 5.500 mm 61.11 61.93 76.20 79.38 92.08 99.57 109.52 114.30 139.70 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerance is ±.062 (1.57 mm). 4. Additional flat washer may be used for terminal seat. 5. Terminal temperature rise under continuous current condition: +95°C. Mixed loads to be conducted at +71°C. 6. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence. 7. Referenced Government docum...