AD6677

Data Sheet 80 MHz Bandwidth, IF Receiver AD6677 FEATURES GENERAL DESCRIPTION JESD204B Subclass 0 or Subclass 1 coded serial digital outputs Signal-to-noise ratio (SNR) = 71.9 dBFS at 185 MHz AIN and 250 MSPS with noise shaping requantizer (NSR) set to 33% Spurious-free dynamic range (SFDR) = 87 dBc at 185 MHz AIN and 250 MSPS Total power consumption: 435 mW at 250 MSPS 1.8 V supply voltages Integer 1 to 8 input clock divider Sample rates of up to 250 MSPS IF sampling frequencies of up to 400 MHz Internal analog-to-digital converter (ADC) voltage reference Flexible analog input range 1.4 V p-p to 2.0 V p-p (1.75 V p-p nominal) ADC clock duty cycle stabilizer (DCS) Serial port control Energy saving power-down modes APPLICATIONS Communications Diversity radio and smart antenna multiple input, multiple output (MIMO) systems Multimode digital receivers (3G) TD-SCDMA, WiMAX, W-CDMA, CDMA2000, GSM, EDGE, LTE I/Q demodulation systems General-purpose software radios The AD6677 is an 11-bit, 250 MSPS, intermediate frequency (IF) receiver specifically designed to support multi-antenna systems in telecommunication applications where high dynamic range performance, low power, and small size are desired. The device consists of a high performance ADC and an NSR digital block. The ADC consists of a multistage, differential pipelined architecture with integrated output error correction logic, and each ADC features a wide bandwidth switched capacitor sampling network within the first stag...