LZC811
PSR & PFC LED Driver Controller
General Description
Fly-back topology
The LZC811 is a single-power stage, • R...
LZC811
PSR & PFC LED Driver Controller
General Description
Fly-back topology
The LZC811 is a single-power stage, Real-Current control to meet accurate
isolated and primary side offline LED lighting
output current
regulator which achieves high power factor. Very less components
The proprietary real-current control method Programmable input AC voltage
can control the LED current accurately from
compensation
the primary side information. It can Leading Edge Blanking on CS/FB pin
significantly simplify the LED lighting system Protection Features
design by eliminating the secondary side
Building in hysteresis OTP
feedback components and the opto-coupler.
VDD over voltage protection
The LZC811 integrates active power factor
Cycle by cycle current limiting on CS
correction and works in Quasi Resonance
pin
mode (QRM) in order to reduce the
Secondary peak current protection
MOSFET switching losses. With a building in
on CS pin
700V start-up MOSFET, IC can eliminate the
Output short to GND protection
power loss caused by start-up resistors to
Output programmable over voltage
provide a high efficiency solution for lighting
protection
applications. The external programmable
FB and CS pins default protection
line voltage compensation provides a more Application circuit
precise output current throughout the
universal AC input voltage range. The
leading edge blanking circuit on the CS/FB input removes the signal glitch and results in reduced ext...