TPLM086L5.5

TPLM 086 L5.5 - Linear Array Module Thermopile Linear Array with 8 Elements Description The integrated ThermoPile Array Sensor consists of a 8-element thermopile chip connected to a multiplexing signal conditioning circuit. The sensor is further equipped with an internal temperature reference for correct target temperature determination. All analog signals, including the ambient temperature, are given out in a fixed frame, containing the information in one serial stream. Lenses for different field of views are available on demand. The sensor in a TO-5 housing is mounted on a small PCB with calibration data for this specific sensor stored in a E2PROM. Features Integrated Optics, Multiplexer, Amplifier and Reference Plug-in Module with Stored Calibration Data Designed for Industrial Temperature Measurements TPLM 086 L5.5 - Linear Array Module Thermopile Linear Array with 8 Elements Figure 1. Package Drawing Figure 2. Output Sequence Figure 3. Top View Package Dimension Table 1. TPLM 086 L5.5 Parameter Field of view Output voltage Output noise Object temperature Operating voltageVDD Operating current Zero signal offset Vref Output resistance Power up time Sample frequency Storage temperature Operating temperature Temperature ref slope ST Temperature ref offset V0 Typical 41 0.95 0.4 -20 to 100 5 1 VDD/2 200 0.3 3 -40 to 100 -20 to 100 10 0 Units ° V mV/√Hz °C V mA V Ω s kHz °C °C mV/K mV Condition f/1, f = 5.5 mm TBB = 80°, Tamb = 20° 0.5 ... 20 Hz VTemp=STTamp/...