TPAM166L3.9

DATAS H E E T p Lighting | Imaging | Telecom Thermopile Infrared Detectors Array Module TPAM 166 L3.9 Thermopile Matrix Array with 4x4 Elements Plug-In Module with Stored Calibration Data Integrated Optics, Multiplexer, Amplifier, Reference and Self Test Function Designed for Industrial Temperature Measurements The integrated ThermoPile Array Sensor consists of a 4x4-elements thermopile chip connected to a multiplexing signal conditioning circuit. The sensor is further equipped with an internal temperature sensor for correct target temperature determination. All analogue signals, including the ambient temperature, are given out in a fixed frame, containing the information in one serial stream. Lenses for different field of views are available on demand.The sensor in a TO-5 housing is mounted on a small pcb with calibration data for this specific sensor stored in an E²PROM. Parameters Field of view Output voltage Output noise Object temperature TPAM typical 166L3.9 units condition 41 x 32 ° f/1, f = 3.9mm 0.95 0.4 V TBB=80°, Tamb=20° mV/Ö Hz 0.5...20Hz -20 100 °C Right for modification reserved / WS /, 21.5.2001 Operating voltageVDD Operating current Zero signal offset Vref Output resistance 5 1 VDD/2 200 V 500K BB 5...14µm mA 500K BB 5...14µm V W Power up time Sample frequency Storage temperature -40 Operating temperature -20 Temperature ref slope ST Temperature ref offset VO 0,3 s 3 kHz 100 °C 100 °C 10 mV/K VTemp=STTamb/K+V0 0 mV S@T@U 6PVU ...