HCNW4506

HCPL-4506/J456/0466, HCNW4506 Intelligent Power Module and Gate Drive Interface Optocouplers Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description The HCPL-4506 and HCPL-0466 contain a GaAsP LED while the HCPL-J456 and the HCNW4506 con­tain an AlGaAs LED. The LED is optically coupled to an inte­grated high gain photo detector. Minimized propagation delay difference between devices makes these optocouplers excellent solutions for improving inverter efficiency through reduced switching dead time. An on chip 20 kΩ output pull-up resistor can be enabled by shorting output pins 6 and 7, thus eliminating the need for an external pull-up resistor in common IPM applications. Specifications and performance plots are given for typical IPM applications. Functional Diagram NC 1 ANODE 2 20 kΩ 8 VCC 7 VL CATHODE 3 6 VO NC 4 SHIELD 5 GND Features Performance specified for bommon IPM applications over industrial temperature range: -40°C to 100°C Fast maximum propagation delays tPHL = 480 ns tPLH = 550 ns Minimized Pulse Width Distortion PWD = 450 ns 15 kV/µs minimum common mode transient immunity at VCM = 1500 V CTR > 44% at IF = 10 mA Safety approval: UL Recognized -3750 V rms / 1 min. for HCPL-4506/0466/J456 -5000 V rms / 1 min. for HCPL-4506 Option 020 and HCNW4506   CSA Approved IEC/EN/DIN EN 60747-5-2 Approved -VIORM = 560 Vpeak for HCPL-0466 Option 060 -VIORM = 630 Vpeak for ...