G3R-O

Solid State Relay G3R-I/O Compact SSRs for I/O Interface with High Dielectric Strength Requirements High-speed models with optimum input ratings for a variety of sensors are available. Input Modules and Output Modules that have the same form-factor as the G2R. Using a coupler approved by VDE 0884 and assuring an I/O dielectric strength of 4 kV. Incorporating an easy-to-see monitoring indicator. Approved by UL, CSA, and TÜV. (“-UTU” models) Ordering Information To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5) ■ Input Module Isolation Indicator Photocoupler Yes Response speed Logic level Supply voltage Supply current — 4 to 32 VDC 0.1 to 100 mA High-speed (1 kHz) Low-speed (10 Hz) Rated input voltage 100 to 240 VAC 5 VDC 12 to 24 VDC 5 VDC 12 to 24 VDC Model G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1 ■ Output Module Isolation Phototriac Photocoupler Indicator Yes Zero cross function Yes No — Rated output load 2 A at 100 to 240 VAC 2 A at 5 to 48 VDC 1.5 A at 48 to 200 VDC Rated input voltage 5 to 24 VDC Note: When ordering a UL, CSA and EN (TÜV) approved model, add “-UTU” to the model number as shown below: Example: G3R-OA202SZN-UTU DC5-24. ■ I/O Indication I/O module classification and AC/DC use are indicated on the mark affixed to the top of the product. Mark indication AC IN DC IN AC OUT DC OUT Specification Input module, AC input Input module, DC input Output module, AC output Output module, ...