Document
POWER RECTIFIER
FEATURES
* High Voltage and High Reliability * High Speed Switching (Trr=120nS) * Low VF in Turn on (VF=1.4V at IF=10A) * Suitable for Damper Diode in Horizontal
Deflection Circuits
MECHANICAL CHARACTERISTICS
* Case: Epoxi, Molded * Easy to Mount on Circuit Board * Shipped 50units per Plastic Tube * Marking: D10U150S
TO-220F
SDS10U150S
1 2
2
1
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage Average Rectified Forward Current, TC=125 Nonrepetetive Peak Surge Current (Halfwave, Single Phase, 60Hz) Operating Junction and Storage Temperature Controlled Avalanche Energe
THERMAL CHARACTERISTICS
Thermal Resistance- Junction to Case
Symbol
VRRM IF(AV) IFSM
Value
1500 10 100
Units
V A A
TJ, TSTG WAVAL
-65 ~ 125 20
mJ
RθJC
4.0 /W
© 1999 Fairchild Semiconductor Corporation
Rev. B
1
SDS10U150S
ELECTRICAL CHARACTERISTICS
POWER RECTIFIER
Characteristics
Symbol Typ Max Units
Maximum Instantaneous Forward Voltage (1) (IF = 10A, TJ = 125 ) (IF = 10A, TJ = 25 ) Maximum Instantaneous Reverse Current (1) (Rated DC Voltage, TJ = 125 ) (Rated DC Voltage, TJ = 25 ) Maximum Reverse Recovery Time (IF = 1.0A, di/dt = 50A/us) Maximum Forward Recovery Time (IF = 6.5A, di/dt = 50A/us) Maximum Forward Recovery Voltage
VF
IR
trr tfr VFRM
(1) Pulse Test: Pulse Width = 300us, Duty Cycle 2.0%
1.3 1.7 1.4 1.8
V
20 200 uA 1.5 15
120 150 ns
200 300 ns 10 14 V
2
IF, INSTANTANEOUSFORWARDCURRENT[AMPS]
POWER RECTIFIER
100
10 Tj =125
25 1
I R, REVERSECURRENT[uA]
SDS10U150S
1000
100 10 Tj =125
1 100
0.1 25
0.01
0.001 0.0
300.0 600.0 900.0 VR, REVERSEVOLTAGE[VOLTS]
1.2k
1.5k
Figure 2. Typical Reverse Current
300 TYPICAL CAPACITANCE AT 0V = 220 pF
200
Cj, CAPACITANCE [pF]
100
0.1 0.4
0.6 0.8 1.0 1.2 1.4 1.6 VF, INSTANTANEOUSVOLTAGE[VOLTS]
1.8
Figure 1. Typical Forward Voltage
0.1 1 10 VR, REVERSE VOLTAGE [VOLTS]
Figure 3. Typical Capacitance
100
3
Qrr, STORED RECOVERY CHARGE [nC]
Trr, REVERSERECOVERY TIME[ns]
SDS10U150S
300 270 240 210 di/dt =50A/us 180 150 100A/us 120 90 60 30
0 0 1 2 3 4 5 6 7 8 9 10 IF, FORWARD CURRENT[AMPS]
Figure 4. Typical Reverse Recovery Time
2000
1500
di/dt =100A/us 1000
50A/us 500
0 0 1 2 3 4 5 6 7 8 9 10 IF, FORWARD CURRENT[AMPS]
Figure 5. Typical Stored Recovery Charge
4
POWER RECTIFIER
POWER RECTIFIER PACKAGE DIMENSION
SDS10U150S Unit : mm
5
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST®
FASTr™ GTO™ HiSeC™
ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into
support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose
be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance
support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the
effectiveness.
user.
PRODUCT STATUS DEFINITIONS Definition of Terms
Datasheet Identification Advance Information
Preliminary
Product Status Formative or In Design
First Production
No Identification Needed
Full Production
Definition
This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
.