VPL-B0752M

Kinetix Rotary Motion Specifications Kinetix VP Low Inertia Motors Kinetix VP (Bulletin VPL) low-inertia servo motors are available with winding options matched to Kinetix 5500 drive ratings. Optimized system sizing lowers system cost and improves energy efficiency. The digital feedback device provides real-time motor performance information to the control system and the single-cable design between motor and drive simplifies installation. Bulletin VPL motors are based on proven MP-Series™ technology for dynamic performance, increased reliability, and leverages high volume production. Kinetix VP Low Inertia Motor Features Attribute Main characteristics Features Motor type Environmental rating Certifications Continuous stall torque Peak stall torque Rated speed Motor rated output Compatible servo drives Typical applications Value Developed to match Kinetix 5500 drive ratings for optimized system sizing Single cable technology High torque to size ratio Low rotor inertia 200V and 400V-class windings High-energy rare-earth magnets Shaft-end threaded hole SpeedTec DIN connector, rotates 325° Standard IEC 72-1 mounting dimensions Brushless AC synchronous servo motors IP50 minimum, without shaft seal (standard) IP66 with optional shaft seal and use of environmentally sealed cable connectors Bulletin VPL rotary motors are UL Recognized components to applicable UL and CSA standards. CE marked for all applicable directives. Refer to http://www.ab.com for more i...