CIC61508
Safety Monitor
User's Manual
R e l e a s e v2.2
Microcontrollers
Edition Nov 2012
Published by Infineon Technologies AG 81726 München, Germany
© Infineon Technologies AG 2012. All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (―Beschaffenheitsgarantie‖). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
Safety Monitor CIC61508
Date 2010-10-21 2010-11-08
2010-11-09 2010-11-09 2010-11-12
2010-11-15 2010-11-17 2010-11-17
2010-11-26
2010-12-10 2011-01-19
Version 0.1 0.2
0.3 0.4 0.5
0.6 0.7 0.8
0.9
0.94 1.0
2011-03-22
2011-03-23
2011-03-24 2011-03-25 2011-04-11 2011-04-21 2012-01-18
2012-04-24
1.1
1.2
1.3 1.4 1.5 1.6 1.7
1.8
2012-05-28
1.9
2012-05-29 User's Manual
2.0
Document Change History
Changed By
Change Description
Viswanath.R
Initial Version
Viswanath.R
Modules prepared Introduction, Error State Monitor, Voltage Monitor and Task Monitor
Viswanath.R
Opcode test sequencer is added
Viswanath.R, Bharatesh
Updated all the sections
Viswanath.R, Bharatesh Viswanath.R, Bharatesh
Added acronyms and the abbreviations and edited all the sections.
updated as per Daryl‘s comments
Viswanath.R, Bharatesh
Added the application use case
Viswanath.R
Modified with the proper page breaks and with proper formats
Ashish K
Incorporated review comments from Mike Beach and Christophe Bouquet
M. Beach/A. Wenlock
Proofing and minor additions
Ashish K
Modified Cover Page Template and updated the formula in Section 2.6.3
Added disclaimer for customization of DFLASH configuration
Ashish K
Removed some confusing terms like ―opcode test sequencer‖ and replaced
them with standard terms
Ashish K
Review comments incorporated. Update with respect to usage of TARDISS tool.
M Beach
Review and minor reformatting
M. Beach/A. Wenlock
Proofing
Bharatesh
Corrected SYSDISA, SYSDISB parameters in section 2.7.1
Bharatesh
Updated section 2.3.1 - SPI Communication Protocol
Bharatesh
UTP AI00064054: Added section 5.1 Selecting CIC61508 system clock frequency
Bharatesh
Incorporated review comment of REV_003314. Added section 5.1 Selecting CIC61508 system clock frequency.
Updated sections 2.1.1.1 - ROM / PFLASH checksum check. 2.2.1 – Correction of CIC state. 2.3.2 - SPI Error Handling. 2.6.1 - Wake-up Timer Operation, 2.6.3 - Wake-up Timer calibration. 3 - Tuning the DFLASH NVM Configuration.
Bharatesh
UTP AI00064054:Updated section 2.3 SPI. Added 7 - Configuration guidelines
Arjun Muddaiah
Updated the Table 7 in section 2.3.2
3 Release v2.2, Nov 2012
Safety Monitor CIC61508
Date
Version
2012-07-10 2012-11-26
2.1 2.2
Document Change History
Changed By
Change Description
with worst case leading and trailing delay.
Arjun Muddaiah
UTP AI00061900: Updated section 2.2.1 - Error Counters
Arjun Muddaiah
UTP AI00127297: Updated the UM to follow the proper naming conventions for Error State Monitor module.
We Listen to Your Comments
Is there any information within this document that you feel is wrong, unclear or missing? Your feedback will help us to continuously improve the quality of this document. Please send your comments (including a reference to this document) to:
mailto:
[email protected] Thank you.
User's Manual
4 Release v2.2, Nov 2012
Safety Monitor CIC61508
Table of Contents
Page
1 1.1 1.2 1.2.1 1.2.2 1.3 1.4 1.5 1.6 1.7 1.8
Introduction ...................................................................................................................................9 Scope ..............................................................................................................................................9 Acronyms, Abbreviations and.