Dual 256-Position I2C Compatible Digital Potentiometer
Data Sheet
Dual, 256-Position, I2C-Compatible Digital Potentiometers AD5243/AD5248
FEATURES
2-channel, 256-position po...
Description
Data Sheet
Dual, 256-Position, I2C-Compatible Digital Potentiometers AD5243/AD5248
FEATURES
2-channel, 256-position potentiometers End-to-end resistance: 2.5 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ Compact 10-lead MSOP (3 mm × 4.9 mm) package Fast settling time: tS = 5 µs typical on power-up Full read/write of wiper register Power-on preset to midscale Extra package address decode pins: AD0 and AD1 (AD5248 only) Computer software replaces microcontroller in factory
programming applications Single supply: 2.7 V to 5.5 V Low temperature coefficient: 35 ppm/°C Low power: IDD = 6 µA maximum Wide operating temperature: −40°C to +125°C Evaluation board available
FUNCTIONAL BLOCK DIAGRAMS
A1 W1 B1
A2 W2 B2
VDD GND
SDA SCL
WIPER REGISTER 1
WIPER REGISTER 2
AD5243
PC INTERFACE
Figure 1. AD5243
W1 B1
W2
B2
04109-0-001
APPLICATIONS
Systems calibrations Electronics level settings Mechanical trimmers replacement in new designs Permanent factory printed circuit board (PCB) setting Transducer adjustment of pressure, temperature, position,
chemical, and optical sensors RF amplifier biasing Gain control and offset adjustment
GENERAL DESCRIPTION
The AD5243 and AD5248 provide a compact 3 mm × 4.9 mm packaged solution for dual, 256-position adjustment applications. The AD5243 performs the same electronic adjustment function as a 3-terminal mechanical potentiometer, and the AD5248 performs the same adjustment function as a 2-terminal variable resistor. Available in four end-to-end resistance ...
Similar Datasheet