SY-U3-P3-O1

www.DataSheet4U.com SY A(U)-P-O Non-isolated Signal converter/amplifier. Low cost and ultra small in size. No calibration needed. SY-A(U)-P-O is a non-isolated signal converter/transmitter, which provide convenience in converting high impedence signals to low impedence ones. With Sunyuan’s unique low cost solution, the device is extremely small in size and very easy to use. No external components are needed to make it operating. The module integrates DC/DC converter and analog amplifier into a single chip. It is mainly used in circumstances where A/V signals nees to convert into each other and isolation is no required. General characteristic: ● Low cost,small size,SIP 8 anti- fire UL94V-0 package ● No external component,no “ZERO”and “G.adj” adjustment needed. ● Power supply/signal two port isolation:1000VAC ● Assistant power:5VDC/12VDC/15VDC/24VDC ●0.4-2V/0.5-2.5V/1-5V/2-10V voltage signal or 0-10mA/0-20mA/4-20mA current signal ● 0-20mA/4-20mA/0-5V/0-10V signal output ●Temperature range: -45~+85 ℃ Applications： ●Can make sensor resistance change from high to low ● No distortion in long distance signal transmission ● Analog signal data acquisition ● 4-20mA/0-5V signal isolation and transfer ● Equipment and sensor signal acquisition ● Signal transmit no-distortion ● Ground interference control Max operation range: Continue isolation voltage value Power Vin range: Jointing temperature(10sec.) Vout signal load(MIN) 1500VDC ±10%Vin +300℃ 2KΩ www.szsunyuan.com Datasheet Ver2...